HI! Any news on that?
Tried today with
openSUSE-Factory-ARM-JeOS-raspberrypi.armv6l-1.12.1-Build211.14.raw.xz but
still no luck.
Any further information needed I could provide?
Ciao, Michael.
BTW: It seems I did not receive all follow-ups cited in Alex' e-mail.
Alex Armstrong wrote:
> Alex Armstrong wrote:
>> Andreas Färber wrote:
>>> Am 14.09.2014 um 02:27 schrieb Alex Armstrong:
>>>> Greetings,
>>>>
>>>> I had a chance to test JeOS Factory Build 207.2 (13-Sep-14) on the Pi
>>>> this weekend and found it didn't boot.
>>>>
>>>> U-boot loads.
>>>> It looks for /uEnv.txt, fails to find it.
>>>> U-boot next looks for, and finds /boot.scr.
>>>> It reads and executes the scrip.
>>>>
>>>> Then this happens:
>>>> -----
>>>> switch to partitions #0, OK
>>>> mmc is current device
>>>> ** File not found boot/linux.vmx **
>>>> SCRIPT FAILED: continuing...
>>>> ** Bad Partition specification mmc 0:0:2 **
>>>> ** Bad Partition specification mmc 0:0:2 **
>>>> ** Bad Partition specification mmc 0:0:2 **
>>> These should be 0:2, so maybe a variable mixup in the script?
>>>
>>> Regards,
>>> Andreas
>>>
>> I haven't yet found what's causing this, but I'm a bit confused by
>> something else too.
>>
>> I think that the boot script is looking to boot 'boot/linux.vmx' with
>> initrd 'boot/initrd.uboot' on the Second Partition (if I'm reading it
>> right). But when I look at the directory structure I see this:
>>
>> <First Partition>
>> BOOT/boot/
>> - linux.vmx
>> - initrd.uboot
>>
>> <Second Partition>
>> /boot/
>> - zImage -> zImage-3.11.4-3-raspberrypi
>> - vmlinux-3.11.4-3-raspberrypi
>> - initrd -> [broken link]
>>
>> What am I missing?
>>
>> -A
> Once at the u-boot prompt it's possible to load a kernel and initrd by
> hand with these commands:
>
> <To load the kernel in the BOOT partition>
> load mmc 0:1 ${kerneladdr} ${kernel}
>
> <OR can load kernel from root partition /boot/>
> load mmc 0:2 ${kerneladdr} boot/zImage
>
> <To load inird in BOOT partition>
> load mmc 0:1 ${ramdiskaddr} ${initrd}; setenv rd_filesize
> ${sizeprefix}:${filesize}
>
> Then can boot with:
>
> bootz ${kerneladdr} ${ramdiskaddr}:${rd_filesize}
>
> This starts the kernel booting - it uncompresses, verifies the checksum
> and boots Linux - but at about 4 seconds in it hangs while trying to
> register the ethernet device:
> ------
> usb 1-1.1: New USB device found, idVendor=0424, idProduct=ec00
> usb 1-1.1: New USB device string: Mfr=0, Product=0, SerialNumber=0
> smsc95xx v1.0.4
> smsc95xx 1-1.1:1.0 eth0: register 'smsc95xx' at usb-bcm2708_usb-1.1,
> smsc95xx USB 2.0 Ethernet, 7a:60:5a:4c:e1:ea
> ------
>
> -A
>
Beste Grüße,
Michael Ströder
--
Michael Ströder Klauprechtstr. 11
Dipl.-Inform. D-76137 Karlsruhe, Germany
Tel.: +49 721 8304316 Mobil: +49 170 2391920
E-Mail: [email protected] http://www.stroeder.com
smime.p7s
Description: S/MIME Cryptographic Signature
