Le 19/09/2014 14:37, Guillaume Gardet a écrit :
Le 19/09/2014 14:28, Michael Ströder a écrit :
HI!
Any news on that?
Tried today with
openSUSE-Factory-ARM-JeOS-raspberrypi.armv6l-1.12.1-Build211.14.raw.xz but
still no luck.
Any further information needed I could provide?
I got the same problem as Alex (once loaded manually).
No idea why the kernel stop like this... And I have no serial port on the RPi
to check if there is something on serial.
I just sent SR #250237 to fix the load but the kernel problem is still there.
Guillaume
Guillaume
Ciao, Michael.
BTW: It seems I did not receive all follow-ups cited in Alex' e-mail.
Alex Armstrong wrote:
Alex Armstrong wrote:
Andreas Färber wrote:
Am 14.09.2014 um 02:27 schrieb Alex Armstrong:
Greetings,
I had a chance to test JeOS Factory Build 207.2 (13-Sep-14) on the Pi
this weekend and found it didn't boot.
U-boot loads.
It looks for /uEnv.txt, fails to find it.
U-boot next looks for, and finds /boot.scr.
It reads and executes the scrip.
Then this happens:
-----
switch to partitions #0, OK
mmc is current device
** File not found boot/linux.vmx **
SCRIPT FAILED: continuing...
** Bad Partition specification mmc 0:0:2 **
** Bad Partition specification mmc 0:0:2 **
** Bad Partition specification mmc 0:0:2 **
These should be 0:2, so maybe a variable mixup in the script?
Regards,
Andreas
I haven't yet found what's causing this, but I'm a bit confused by
something else too.
I think that the boot script is looking to boot 'boot/linux.vmx' with
initrd 'boot/initrd.uboot' on the Second Partition (if I'm reading it
right). But when I look at the directory structure I see this:
<First Partition>
BOOT/boot/
- linux.vmx
- initrd.uboot
<Second Partition>
/boot/
- zImage -> zImage-3.11.4-3-raspberrypi
- vmlinux-3.11.4-3-raspberrypi
- initrd -> [broken link]
What am I missing?
-A
Once at the u-boot prompt it's possible to load a kernel and initrd by
hand with these commands:
<To load the kernel in the BOOT partition>
load mmc 0:1 ${kerneladdr} ${kernel}
<OR can load kernel from root partition /boot/>
load mmc 0:2 ${kerneladdr} boot/zImage
<To load inird in BOOT partition>
load mmc 0:1 ${ramdiskaddr} ${initrd}; setenv rd_filesize
${sizeprefix}:${filesize}
Then can boot with:
bootz ${kerneladdr} ${ramdiskaddr}:${rd_filesize}
This starts the kernel booting - it uncompresses, verifies the checksum
and boots Linux - but at about 4 seconds in it hangs while trying to
register the ethernet device:
------
usb 1-1.1: New USB device found, idVendor=0424, idProduct=ec00
usb 1-1.1: New USB device string: Mfr=0, Product=0, SerialNumber=0
smsc95xx v1.0.4
smsc95xx 1-1.1:1.0 eth0: register 'smsc95xx' at usb-bcm2708_usb-1.1,
smsc95xx USB 2.0 Ethernet, 7a:60:5a:4c:e1:ea
------
-A
Beste Grüße,
Michael Ströder
--
Michael Ströder Klauprechtstr. 11
Dipl.-Inform. D-76137 Karlsruhe, Germany
Tel.: +49 721 8304316 Mobil: +49 170 2391920
E-Mail: [email protected] http://www.stroeder.com
--
To unsubscribe, e-mail: [email protected]
To contact the owner, e-mail: [email protected]
