On Sat, 11 Oct 2014 16:51:39 -0700 lists <[email protected]> wrote:
> On Sun, 12 Oct 2014 00:28:29 +0200 > Alexjan Carraturo <[email protected]> wrote: > > > 2014-10-11 20:58 GMT+02:00 Sebastian Kratz > > <[email protected]>: > > > -----BEGIN PGP SIGNED MESSAGE----- > > > Hash: SHA512 > > > > > > On 10/11/2014 08:48 PM, Alexjan Carraturo wrote: > > >> Someone have advice to let the monitor hdmi work correctly? > > > > > > > First of all, thanks Sebastian for your answer. > > > > > > > if you havn't connected or disabled keyboard/mouse the beagle will > > > go into powersaving which also disables hdmi. try connecting the > > > monitor and do > > > > > > echo 0 > /sys/class/graphics/fb0/blank > > > > > > > I've tried, but no changes. > > > > > otherwise, many people have reported issues with hdmi on the > > > beaglebone: > > > > > > http://elinux.org/Beagleboard:BeagleBoneBlack_HDMI#HDMI_Issues > > > > > > see also tested aka supported monitors: > > > > > > http://elinux.org/Beagleboard:BeagleBone_Black_Accessories#Monitors_and_Resolutions > > > > > > > I read this links, and I found interesting but > > 1) I don't understand the reason to ask a power supply grounded > > (there is no ground on board plug) and that have to be the same > > ground of the monitor. > > 2) My monitor it's a common LG 42'' inches TV. I don't think that > > the problem is the cable or the power adapter and not the screen > > too. I think in that way because the same board, with the same > > cable, with the same power adapter, on the same TV, but with a > > different OS (Fedora 20) was able to show on screen KDE 4 (slow, > > sure, but visible). > > > > I don't know if is a software problem, and if other guys have their > > beaglebone black up & running with HDMI working, I have to think > > that is a mixed issue (hw & sw). > > > > Anyway, any advice or user experience are welcome. > > Thanks in advance > > regards > > Alexjan > > > > > - -- > > > Sebastian Kratz > > > @ProhtMeyhet > > I've got a BBB and am downloading the file at the moment. My board has > run opensuse JEOS in the past so this should be a good test. [Given my > limited skill set, this is about all I can do to contribute. ;-) ] > > I noticed there is no sha256 for the XFCE disty. Maybe the file isn't > good. > > FWIW, my HDMI cable is plugged into a DVI converter and KVM before > going to my monitor. I doubt it makes a difference, but when you chase > bugs, you need to be specific. > > I'm on DSL so see ya in a few hours. > > > I can confirm there is no graphics on the HDMI port as the original poster indicated. The OS seems to work OK on the serial port. Maybe a bit sluggish as compared to ubuntu on the built in flash, but that is just an impression, i.e. nothing scientific. -- To unsubscribe, e-mail: [email protected] To contact the owner, e-mail: [email protected]
