On 23.11.14 10:03, lists wrote: > On Sun, 23 Nov 2014 08:46:25 +0100 > Alexander Graf <[email protected]> wrote: > >> >> >> >>> Am 23.11.2014 um 06:37 schrieb lists <[email protected]>: >>> >>> On Sat, 22 Nov 2014 14:25:31 -0800 >>> lists <[email protected]> wrote: >>> >>>> On Sun, 23 Nov 2014 01:09:20 +0400 >>>> "Matwey V. Kornilov" <[email protected]> wrote: >>>> >>>>> 2014-11-23 0:00 GMT+03:00 Zack Piper <[email protected]>: >>>>>> On Sun, Nov 23, 2014 at 12:50:44AM +0400, Matwey V. Kornilov >>>>>> wrote: >>>>>>> 2014-11-22 23:44 GMT+03:00 Zack Piper <[email protected]>: >>>>>>>> The BeagleBone Black JeOS image, I have not been using the boot >>>>>>>> switch button, I have tried it, no LEDs lightup. >>>>>>> >>>>>>> Which version? 13.1 13.2 Factory? >>>>>>> >>>>>>>> Another qustion, does the openSUSE image automatically activate >>>>>>>> a tty-over-USB at all? >>>>>>> >>>>>>> No >>>>>>> >>>>>>> >>>>>>> -- >>>>>>> With best regards, >>>>>>> Matwey V. Kornilov >>>>>>> http://blog.matwey.name >>>>>>> xmpp://[email protected] >>>>>> Oops, sorry, I am using 13.2. >>>>> >>>>> Hm, I've tried this couple hours ago, it worked. However, first >>>>> boot takes several minutes. >>>>> >>>>>> Is there a guide on enabling tty-over-USB? >>>>> >>>>> It is disabled in config, I don't know why. >>>> >>>> I see a new image (26.3 of JEOS 13,2) has been uploaded. I'm >>>> downloading it now, will flog it and report my findings. Note >>>> there is no sha256 for the download. >>>> >>>> However just to be clear, on rev 26.2, the USB was totally not >>>> functional. It would not recognize usb devices plugged into it. >>>> lsusb only detected the usb chip on the SBC, >>>> >>>> There is some confusion on the interwebs about which serial cable >>>> to get. I can say the FTDI one from Adafruit works fine. But the >>>> ethernet connection worked on the initial installation, so if >>>> somebody got lucky, they wouldn't need the serial cable. You would >>>> be installing the OS in the blind, which is why I mentioned luck. >>> >>> The 26.3 rev has issues. The serial port doesn't work well. This >>> problem wasn't evident in the 26.2 rev. USB still doesn't work. >> >> Looks like it's working to me ;). The serial port issues usually come >> from a loose cable. If you press against the serial pin connectors >> they should go away. >> >> Alex >> > > > I have a SD card with Debian and it works just great on the serial > port. No hardware problems on my end. > > I just loaded Angstrom. Serial output at the end of the message. Are you > using JEOS?
Yeah. > I find the serial port failing to display characters on the > JEOS 13.2 rev 26.3. The data is sent, but don't get echoed. How do you see this is happening? I'll get a new BBB tomorrow that I'll slam 13.2 onto. Then I can let you know whether it works for me ;). Alex -- To unsubscribe, e-mail: [email protected] To contact the owner, e-mail: [email protected]
