On 23.11.14 19:32, Alexander Graf wrote: > > > On 23.11.14 10:03, lists wrote: >> On Sun, 23 Nov 2014 08:46:25 +0100 >> Alexander Graf <[email protected]> wrote: >> >>> >>> >>> >>>> Am 23.11.2014 um 06:37 schrieb lists <[email protected]>: >>>> >>>> On Sat, 22 Nov 2014 14:25:31 -0800 >>>> lists <[email protected]> wrote: >>>> >>>>> On Sun, 23 Nov 2014 01:09:20 +0400 >>>>> "Matwey V. Kornilov" <[email protected]> wrote: >>>>> >>>>>> 2014-11-23 0:00 GMT+03:00 Zack Piper <[email protected]>: >>>>>>> On Sun, Nov 23, 2014 at 12:50:44AM +0400, Matwey V. Kornilov >>>>>>> wrote: >>>>>>>> 2014-11-22 23:44 GMT+03:00 Zack Piper <[email protected]>: >>>>>>>>> The BeagleBone Black JeOS image, I have not been using the boot >>>>>>>>> switch button, I have tried it, no LEDs lightup. >>>>>>>> >>>>>>>> Which version? 13.1 13.2 Factory? >>>>>>>> >>>>>>>>> Another qustion, does the openSUSE image automatically activate >>>>>>>>> a tty-over-USB at all? >>>>>>>> >>>>>>>> No >>>>>>>> >>>>>>>> >>>>>>>> -- >>>>>>>> With best regards, >>>>>>>> Matwey V. Kornilov >>>>>>>> http://blog.matwey.name >>>>>>>> xmpp://[email protected] >>>>>>> Oops, sorry, I am using 13.2. >>>>>> >>>>>> Hm, I've tried this couple hours ago, it worked. However, first >>>>>> boot takes several minutes. >>>>>> >>>>>>> Is there a guide on enabling tty-over-USB? >>>>>> >>>>>> It is disabled in config, I don't know why. >>>>> >>>>> I see a new image (26.3 of JEOS 13,2) has been uploaded. I'm >>>>> downloading it now, will flog it and report my findings. Note >>>>> there is no sha256 for the download. >>>>> >>>>> However just to be clear, on rev 26.2, the USB was totally not >>>>> functional. It would not recognize usb devices plugged into it. >>>>> lsusb only detected the usb chip on the SBC, >>>>> >>>>> There is some confusion on the interwebs about which serial cable >>>>> to get. I can say the FTDI one from Adafruit works fine. But the >>>>> ethernet connection worked on the initial installation, so if >>>>> somebody got lucky, they wouldn't need the serial cable. You would >>>>> be installing the OS in the blind, which is why I mentioned luck. >>>> >>>> The 26.3 rev has issues. The serial port doesn't work well. This >>>> problem wasn't evident in the 26.2 rev. USB still doesn't work. >>> >>> Looks like it's working to me ;). The serial port issues usually come >>> from a loose cable. If you press against the serial pin connectors >>> they should go away. >>> >>> Alex >>> >> >> >> I have a SD card with Debian and it works just great on the serial >> port. No hardware problems on my end. >> >> I just loaded Angstrom. Serial output at the end of the message. Are you >> using JEOS? > > Yeah. > >> I find the serial port failing to display characters on the >> JEOS 13.2 rev 26.3. The data is sent, but don't get echoed. > > How do you see this is happening? > > I'll get a new BBB tomorrow that I'll slam 13.2 onto. Then I can let you > know whether it works for me ;).
Works like a charm here. I see every single character very clearly. Maybe you have 2 screen sessions active on the same tty device? Alex -- To unsubscribe, e-mail: [email protected] To contact the owner, e-mail: [email protected]
