Op zondag 6 september 2015 12:58:55 schreef Olav Reinert: > I tried to upgrade to the new layout by installing a fresh 13.2 image: > > <http://download.opensuse.org/repositories/devel:/ARM:/13.2:/Contrib:/Raspbe > rryPi/images/openSUSE-13.2-ARM-JeOS-raspberrypi.armv6l-1.12.1-Build36.9.raw. > xz> > > Unfortunately, that image won't boot properly. It gets as far as the > "Starting kernel ...", then it seems to hang.
You probably should use the Tumbleweed image on: http://download.opensuse.org/repositories/devel:/ARM:/Factory:/Contrib:/RaspberryPi:/upstream/images/ The ones on http://download.opensuse.org/repositories/devel:/ARM:/Factory:/Contrib:/RaspberryPi/images/ never worked. The newest image is Build338.1. I did not test this image. The latest I tested was Build336.3, but that one has a distorted 3rd partition (ext4). Running fsck on that partition after moving the image on the SD card shows errors. The latest which was usable was Build 330.10 from Aug 6. A zypper up brings it in line with the latest repositories. This is what I am using now. All the problems I had with YaST are fixed now. I am still struggling with a Bluetooth device and/or Wi-Fi. When I have a few % packet loss, because of the distance on the Wi-Fi connection, curl does not deliver me a proper file. Curl is used by zypper and zypper shows wrong check sums. curl does not report an error, but the check sum is wrong. -- fr.gr. member openSUSE Freek de Kruijf -- To unsubscribe, e-mail: opensuse-arm+unsubscr...@opensuse.org To contact the owner, e-mail: opensuse-arm+ow...@opensuse.org