Hi Thomas,
Am 18.10.2015 um 14:03 schrieb Thomas Bechtold:
> I tried to use the Tumbleweed images from [1] but the image does not
> boot.
The error is not telling to me... I recently helped Doug install
Tumbleweed on a Cubox-i, maybe he has some idea?
Cheers,
Andreas
> Here's the output during boot:
>
> U-Boot SPL 2013.10-rc4 (Oct 16 2015 - 05:16:01)
> Boot Device: SD1
> spl: error reading image u-boot.img, err - -1
> Load image from RAW...
>
>
> U-Boot 2013.10-rc4 (Oct 16 2015 - 05:16:01)
>
> CPU: Freescale i.MX6Q rev1.2 at 792 MHz
> Reset cause: POR
> Board: MX6-CuBox-i
> DRAM: 2 GiB
> MMC: FSL_SDHC: 0
> *** Warning - bad CRC, using default environment
>
> In: serial
> Out: serial
> Err: serial
> Net: FEC [PRIME]
> Hit any key to stop autoboot: 0
> mmc0 is current device
> 2762 bytes read in 34 ms (79.1 KiB/s)
> Running bootscript from mmc ...
> ## Executing script at 10800000
> mmc0 is current device
> 7163544 bytes read in 492 ms (13.9 MiB/s)
> 49298053 bytes read in 2897 ms (16.2 MiB/s)
> ** File not found dtb/call_autodetectfdt **
> Kernel image @ 0x10800100 [ 0x000000 - 0x6d4e98 ]
> ## Loading init Ramdisk from Legacy Image at 14800100 ...
> Image Name: Initrd
> Image Type: ARM Linux RAMDisk Image (uncompressed)
> Data Size: 49297989 Bytes = 47 MiB
> Load Address: 00000000
> Entry Point: 00000000
> Verifying Checksum ... OK
> ERROR: Did not find a cmdline Flattened Device Tree
> Could not find a valid device tree
> ** File not found /boot/boot.scr **
> ** File not found /boot/uEnv.txt **
> ** File not found /boot/zImage **
> ** File not found /boot/uImage **
> Booting from net ...
> FEC Waiting for PHY auto negotiation to complete......... TIMEOUT !
> Could not initialize PHY FEC
> FEC Waiting for PHY auto negotiation to complete......... TIMEOUT !
> Could not initialize PHY FEC
> FEC Waiting for PHY auto negotiation to complete......... TIMEOUT !
> Could not initialize PHY FEC
> Booting uImage
> ## Booting kernel from Legacy Image at 10800000 ...
> Image Name: Boot-Script
> Image Type: ARM Linux Script (uncompressed)
> Data Size: 2698 Bytes = 2.6 KiB
> Load Address: 00000000
> Entry Point: 00000000
> Contents:
> Image 0: 2690 Bytes = 2.6 KiB
> Verifying Checksum ... Bad Data CRC
> ERROR: can't get kernel image!
> CuBox-i U-Boot >
>
>
>
> Evironment is:
>
> CuBox-i U-Boot > printenv
> autoboot=echo Booting ${boot_file}; if test ${boot_file} = zImage; then
> bootz ${loadaddr} ${ramdisk_addr} ${fdt_addr}; else bootm ${loadaddr}
> ${ramdisk_addr} ${fdt_addr}; fi;
> autodetectfdt=if test ${cpu} = 6SOLO || test ${cpu} = 6DL; then setenv
> fdt_prefix imx6dl; else setenv fdt_prefix imx6q; fi; if test ${board} =
> mx6-cubox-i; then setenv fdt_file ${fdt_prefix}-cubox-i.dtb; elif test
> ${board} = mx6-hummingboard; then setenv fdt_file ${fdt_prefix}-
> hummingboard.dtb; else setenv fdt_file ${fdt_prefix}-hummingboard2.dtb;
> fi;
> baudrate=115200
> board=mx6-cubox-i
> boot_fdt=try
> boot_file=uImage
> boot_kernel=${boottype} ${kerneladdr} ${ramdiskaddr}:${rd_filesize}
> ${fdtaddr}
> boot_prefixes=/ /boot/
> bootargs=console=ttymxc0,115200 root=/dev/nfs ip=dhcp nfsroot=:,v3,tcp
> bootcmd=for bootdev in ${bootdevs}; do for unit in ${units}; do setenv
> bootpart; for bootpart in ${bootparts}; do setenv fix_bootpart "setenv
> bootpart $bootpart"; run fix_bootpart; run setdev; run doit; done;
> done; done
> bootdelay=3
> bootdevs=mmc
> bootenv=uEnv.txt
> bootfile=uImage
> bootit=setenv boot_file ${bootfile}; if test -n ${ramdisk_file}; then
> if run loadramdisk; then echo Loaded ${ramdisk_file}; setenv
> ramdisk_addr ${ramdisk_addr}:0x${filesize}; else setenv ramdisk_addr -;
> fi; else setenv ramdisk_addr -; fi; if test ${boot_file} = zImage; then
> if test ${boot_fdt} = yes || test ${boot_fdt} = try; then if run
> loadfdt; then echo Loaded ${fdt_file}; else setenv fdt_addr; if test
> ${boot_fdt} = try; then echo WARN: Cannot load the DTB and boot file is
> type zImage;echo if you have not appended a dtb to the file it may;echo
> hang after displaying Starting kernel...;echo ;else echo WARN: Cannot
> load the DT; fi; fi; else setenv fdt_addr; fi; else setenv fdt_addr;
> fi; run autoboot;
> bootpart=0:1
> bootparts=${unit}:1
> bootscript=echo Running bootscript from mmc ...; source;
> boottype=net
> console=ttymxc0
> cpu=6Q
> doit=run load_splashfile; if run load_kernel; then; run load_initrd;
> run loadfdt; run boot_kernel; fi
> ethact=FEC
> ethaddr=d0:63:b4:00:66:05
> ethprime=FEC
> fdt_file=imx6q-cubox-i.dtb
> fdt_high=0xffffffff
> fdt_prefix=imx6q
> fdtaddr=0x14700100
> fdtfile=call_autodetectfdt
> fdtfolder=dtb
> file_prefix=/boot/
> filesize=2f03a85
> fix_bootpart=setenv bootpart ${unit}:1
> flavor=cuboxi
> get_cmd=dhcp
> importbootenv=echo Importing environment from mmc${mmcdev} ...; env
> import -t ${loadaddr} ${filesize};
> initrd=boot/initrd.uboot
> initrd_high=0xffffffff
> ip_dyn=yes
> kernel=boot/linux.vmx
> kerneladdr=0x10800100
> load_initrd=${fs}load ${bootdev} ${bootpart} ${ramdiskaddr} ${initrd};
> setenv rd_filesize ${sizeprefix}${filesize}
> load_kernel=${fs}load ${bootdev} ${bootpart} ${kerneladdr} ${kernel}
> load_splashfile=
> loadaddr=0x10800000
> loadbootenv=load mmc ${mmcdev}:${mmcpart} ${loadaddr}
> ${file_prefix}${bootenv};
> loadbootfile=load mmc ${mmcdev}:${mmcpart} ${loadaddr}
> ${file_prefix}${bootfile};
> loadbootscript=load mmc ${mmcdev}:${mmcpart} ${loadaddr}
> ${file_prefix}${script};
> loadfdt=${fs}load ${bootdev} ${bootpart} ${fdtaddr}
> ${fdtfolder}/${fdtfile}
> loadramdisk=if test ${boottype} = mmc; then load mmc
> ${mmcdev}:${mmcpart} ${ramdisk_addr} ${file_prefix}${ramdisk_file};
> else ${get_cmd} ${ramdisk_addr} ${ramdisk_file}; fi;
> mmcargs=setenv bootargs quiet console=${console},${baudrate}
> root=${mmcroot};
> mmcboot=echo Booting from mmc ...; run mmcargs; setenv boottype mmc;
> run bootit;
> mmcdev=0
> mmcpart=1
> mmcroot=/dev/mmcblk0p2 rootwait rw
> netargs=setenv bootargs console=${console},${baudrate} root=/dev/nfs
> ip=dhcp nfsroot=${serverip}:${nfsroot},v3,tcp;
> netboot=echo Booting from net ...; run netargs; setenv boottype net; if
> test ${ip_dyn} = yes; then setenv get_cmd dhcp; else setenv get_cmd
> tftp; fi; if test ${bootfile} = auto; then setenv bootfile zImage; if
> ${get_cmd} ${bootfile}; then run bootit; else setenv bootfile uImage;
> fi; fi; ${get_cmd} ${bootfile}; run bootit;
> origbootfile=auto
> preboot=if hdmidet; then usb start; setenv stdin serial,usbkbd; setenv
> stdout serial,vga; setenv stderr serial,vga; else setenv stdin serial;
> setenv stdout serial; setenv stderr serial; fi;
> ramdisk=boot/initrd.uboot
> ramdisk_addr=-
> ramdisk_file=initrd
> ramdiskaddr=0x14800100
> rd_filesize=0x2f03a85
> script=boot.scr
> setdev=mmc dev ${unit}
> should_load_fdt=1
> should_use_fdt=1
> should_use_splashfile=0
> sizeprefix=0x
> splashfile=opensuse.bmp
> splashpos=m,m
> stderr=serial
> stdin=serial
> stdout=serial
> target=firstboot
> units=0
> update_sd_firmware=if test ${ip_dyn} = yes; then setenv get_cmd dhcp;
> else setenv get_cmd tftp; fi; if mmc dev ${mmcdev}; then if ${get_cmd}
> ${update_sd_firmware_filename}; then setexpr fw_sz ${filesize} / 0x200;
> setexpr fw_sz ${fw_sz} + 1; mmc write ${loadaddr} 0x2 ${fw_sz}; fi; fi;
> update_sd_firmware_filename=u-boot.imx
>
> Environment size: 4849/8188 bytes
> CuBox-i U-Boot >
>
>
> Comments how to solve this?
>
>
> Best,
>
> Tom
>
> [1] http://download.opensuse.org/repositories/devel:/ARM:/Factory:/Cont
> rib:/IMX6/images/openSUSE-Tumbleweed-ARM-JeOS-cuboxi.armv7l.raw.xz
>
>
--
SUSE Linux GmbH, Maxfeldstr. 5, 90409 Nürnberg, Germany
GF: Felix Imendörffer, Jane Smithard, Graham Norton; HRB 21284 (AG Nürnberg)
--
To unsubscribe, e-mail: [email protected]
To contact the owner, e-mail: [email protected]
