Le 18/10/2015 16:16, Andreas Färber a écrit :
Hi Thomas,
Am 18.10.2015 um 14:03 schrieb Thomas Bechtold:
I tried to use the Tumbleweed images from [1] but the image does not
boot.
The error is not telling to me... I recently helped Doug install
Tumbleweed on a Cubox-i, maybe he has some idea?
The problem is that "autodetectfdt" command is not called so, fdtfile is not
set correctly. But I do not know why since boot script seems ok.
By the way, cuboxi is now supported in mainline u-boot and available in
openSUSE. So we may switch to it? Note that mainline do not use 'autodetectfdt'
but 'findfdt' instead.
Guillaume
Cheers,
Andreas
Here's the output during boot:
U-Boot SPL 2013.10-rc4 (Oct 16 2015 - 05:16:01)
Boot Device: SD1
spl: error reading image u-boot.img, err - -1
Load image from RAW...
U-Boot 2013.10-rc4 (Oct 16 2015 - 05:16:01)
CPU: Freescale i.MX6Q rev1.2 at 792 MHz
Reset cause: POR
Board: MX6-CuBox-i
DRAM: 2 GiB
MMC: FSL_SDHC: 0
*** Warning - bad CRC, using default environment
In: serial
Out: serial
Err: serial
Net: FEC [PRIME]
Hit any key to stop autoboot: 0
mmc0 is current device
2762 bytes read in 34 ms (79.1 KiB/s)
Running bootscript from mmc ...
## Executing script at 10800000
mmc0 is current device
7163544 bytes read in 492 ms (13.9 MiB/s)
49298053 bytes read in 2897 ms (16.2 MiB/s)
** File not found dtb/call_autodetectfdt **
Kernel image @ 0x10800100 [ 0x000000 - 0x6d4e98 ]
## Loading init Ramdisk from Legacy Image at 14800100 ...
Image Name: Initrd
Image Type: ARM Linux RAMDisk Image (uncompressed)
Data Size: 49297989 Bytes = 47 MiB
Load Address: 00000000
Entry Point: 00000000
Verifying Checksum ... OK
ERROR: Did not find a cmdline Flattened Device Tree
Could not find a valid device tree
** File not found /boot/boot.scr **
** File not found /boot/uEnv.txt **
** File not found /boot/zImage **
** File not found /boot/uImage **
Booting from net ...
FEC Waiting for PHY auto negotiation to complete......... TIMEOUT !
Could not initialize PHY FEC
FEC Waiting for PHY auto negotiation to complete......... TIMEOUT !
Could not initialize PHY FEC
FEC Waiting for PHY auto negotiation to complete......... TIMEOUT !
Could not initialize PHY FEC
Booting uImage
## Booting kernel from Legacy Image at 10800000 ...
Image Name: Boot-Script
Image Type: ARM Linux Script (uncompressed)
Data Size: 2698 Bytes = 2.6 KiB
Load Address: 00000000
Entry Point: 00000000
Contents:
Image 0: 2690 Bytes = 2.6 KiB
Verifying Checksum ... Bad Data CRC
ERROR: can't get kernel image!
CuBox-i U-Boot >
Evironment is:
CuBox-i U-Boot > printenv
autoboot=echo Booting ${boot_file}; if test ${boot_file} = zImage; then
bootz ${loadaddr} ${ramdisk_addr} ${fdt_addr}; else bootm ${loadaddr}
${ramdisk_addr} ${fdt_addr}; fi;
autodetectfdt=if test ${cpu} = 6SOLO || test ${cpu} = 6DL; then setenv
fdt_prefix imx6dl; else setenv fdt_prefix imx6q; fi; if test ${board} =
mx6-cubox-i; then setenv fdt_file ${fdt_prefix}-cubox-i.dtb; elif test
${board} = mx6-hummingboard; then setenv fdt_file ${fdt_prefix}-
hummingboard.dtb; else setenv fdt_file ${fdt_prefix}-hummingboard2.dtb;
fi;
baudrate=115200
board=mx6-cubox-i
boot_fdt=try
boot_file=uImage
boot_kernel=${boottype} ${kerneladdr} ${ramdiskaddr}:${rd_filesize}
${fdtaddr}
boot_prefixes=/ /boot/
bootargs=console=ttymxc0,115200 root=/dev/nfs ip=dhcp nfsroot=:,v3,tcp
bootcmd=for bootdev in ${bootdevs}; do for unit in ${units}; do setenv
bootpart; for bootpart in ${bootparts}; do setenv fix_bootpart "setenv
bootpart $bootpart"; run fix_bootpart; run setdev; run doit; done;
done; done
bootdelay=3
bootdevs=mmc
bootenv=uEnv.txt
bootfile=uImage
bootit=setenv boot_file ${bootfile}; if test -n ${ramdisk_file}; then
if run loadramdisk; then echo Loaded ${ramdisk_file}; setenv
ramdisk_addr ${ramdisk_addr}:0x${filesize}; else setenv ramdisk_addr -;
fi; else setenv ramdisk_addr -; fi; if test ${boot_file} = zImage; then
if test ${boot_fdt} = yes || test ${boot_fdt} = try; then if run
loadfdt; then echo Loaded ${fdt_file}; else setenv fdt_addr; if test
${boot_fdt} = try; then echo WARN: Cannot load the DTB and boot file is
type zImage;echo if you have not appended a dtb to the file it may;echo
hang after displaying Starting kernel...;echo ;else echo WARN: Cannot
load the DT; fi; fi; else setenv fdt_addr; fi; else setenv fdt_addr;
fi; run autoboot;
bootpart=0:1
bootparts=${unit}:1
bootscript=echo Running bootscript from mmc ...; source;
boottype=net
console=ttymxc0
cpu=6Q
doit=run load_splashfile; if run load_kernel; then; run load_initrd;
run loadfdt; run boot_kernel; fi
ethact=FEC
ethaddr=d0:63:b4:00:66:05
ethprime=FEC
fdt_file=imx6q-cubox-i.dtb
fdt_high=0xffffffff
fdt_prefix=imx6q
fdtaddr=0x14700100
fdtfile=call_autodetectfdt
fdtfolder=dtb
file_prefix=/boot/
filesize=2f03a85
fix_bootpart=setenv bootpart ${unit}:1
flavor=cuboxi
get_cmd=dhcp
importbootenv=echo Importing environment from mmc${mmcdev} ...; env
import -t ${loadaddr} ${filesize};
initrd=boot/initrd.uboot
initrd_high=0xffffffff
ip_dyn=yes
kernel=boot/linux.vmx
kerneladdr=0x10800100
load_initrd=${fs}load ${bootdev} ${bootpart} ${ramdiskaddr} ${initrd};
setenv rd_filesize ${sizeprefix}${filesize}
load_kernel=${fs}load ${bootdev} ${bootpart} ${kerneladdr} ${kernel}
load_splashfile=
loadaddr=0x10800000
loadbootenv=load mmc ${mmcdev}:${mmcpart} ${loadaddr}
${file_prefix}${bootenv};
loadbootfile=load mmc ${mmcdev}:${mmcpart} ${loadaddr}
${file_prefix}${bootfile};
loadbootscript=load mmc ${mmcdev}:${mmcpart} ${loadaddr}
${file_prefix}${script};
loadfdt=${fs}load ${bootdev} ${bootpart} ${fdtaddr}
${fdtfolder}/${fdtfile}
loadramdisk=if test ${boottype} = mmc; then load mmc
${mmcdev}:${mmcpart} ${ramdisk_addr} ${file_prefix}${ramdisk_file};
else ${get_cmd} ${ramdisk_addr} ${ramdisk_file}; fi;
mmcargs=setenv bootargs quiet console=${console},${baudrate}
root=${mmcroot};
mmcboot=echo Booting from mmc ...; run mmcargs; setenv boottype mmc;
run bootit;
mmcdev=0
mmcpart=1
mmcroot=/dev/mmcblk0p2 rootwait rw
netargs=setenv bootargs console=${console},${baudrate} root=/dev/nfs
ip=dhcp nfsroot=${serverip}:${nfsroot},v3,tcp;
netboot=echo Booting from net ...; run netargs; setenv boottype net; if
test ${ip_dyn} = yes; then setenv get_cmd dhcp; else setenv get_cmd
tftp; fi; if test ${bootfile} = auto; then setenv bootfile zImage; if
${get_cmd} ${bootfile}; then run bootit; else setenv bootfile uImage;
fi; fi; ${get_cmd} ${bootfile}; run bootit;
origbootfile=auto
preboot=if hdmidet; then usb start; setenv stdin serial,usbkbd; setenv
stdout serial,vga; setenv stderr serial,vga; else setenv stdin serial;
setenv stdout serial; setenv stderr serial; fi;
ramdisk=boot/initrd.uboot
ramdisk_addr=-
ramdisk_file=initrd
ramdiskaddr=0x14800100
rd_filesize=0x2f03a85
script=boot.scr
setdev=mmc dev ${unit}
should_load_fdt=1
should_use_fdt=1
should_use_splashfile=0
sizeprefix=0x
splashfile=opensuse.bmp
splashpos=m,m
stderr=serial
stdin=serial
stdout=serial
target=firstboot
units=0
update_sd_firmware=if test ${ip_dyn} = yes; then setenv get_cmd dhcp;
else setenv get_cmd tftp; fi; if mmc dev ${mmcdev}; then if ${get_cmd}
${update_sd_firmware_filename}; then setexpr fw_sz ${filesize} / 0x200;
setexpr fw_sz ${fw_sz} + 1; mmc write ${loadaddr} 0x2 ${fw_sz}; fi; fi;
update_sd_firmware_filename=u-boot.imx
Environment size: 4849/8188 bytes
CuBox-i U-Boot >
Comments how to solve this?
Best,
Tom
[1] http://download.opensuse.org/repositories/devel:/ARM:/Factory:/Cont
rib:/IMX6/images/openSUSE-Tumbleweed-ARM-JeOS-cuboxi.armv7l.raw.xz
--
To unsubscribe, e-mail: [email protected]
To contact the owner, e-mail: [email protected]
