Hi Vladimir, Am 20.07.2017 um 00:09 schrieb Vladimir Nadvornik: > I have new Orange Pi Prime board and I'd like to run openSUSE on it :) [...] > I tried to compile u-boot 2017-07 from Base:System:Staging. The > board config is already there but it seems that there is problem with > building SPL - there is this message during build: > > [ 246s] WARNING: BL31 file bl31.bin NOT found, resulting binary is > non-functional > [ 246s] Please read the section on ARM Trusted Firmware (ATF) in > board/sunxi/README.sunxi64
Nevertheless, please do a Submit Request preparing such a package, or let me know the name of the config you need added. > BTW, the already enabled board Orange Pi PC2 seems to have the same > problem. Guillaume took care of the version update, I have not yet done a round of testing. Previous kernel tests were with a self-compiled U-Boot. > I haven't found anything like this in build service, do I understand > it correctly that it needs to be packaged? The ATF package is not in Factory, because it is not upstream. I have the upstream one in my home. We would need to find a suitable devel project to submit it to - probably Base:System. You can find an arm-trusted-firmware-pine64 package in Contrib:Pine64 and need to rebuild your U-Boot package against it (adding a BuildRequires in your branch and setting some BL31 variable according to the above README). If you want, we can add a Contrib:OrangePiPrime project for your board. The 4.12 kernel was not yet working for the H5, so you'll need either 4.13-rc1 from Kernel:HEAD or kernel-sunxi64 from Contrib:Pine64. Regards, Andreas -- SUSE Linux GmbH, Maxfeldstr. 5, 90409 Nürnberg, Germany GF: Felix Imendörffer, Jane Smithard, Graham Norton HRB 21284 (AG Nürnberg) -- To unsubscribe, e-mail: [email protected] To contact the owner, e-mail: [email protected]
