Hi,
Updating my Raspberry Pi Zero to latest Tumbleweed plus staging U-Boot,
I get an exception in GRUB. Could this be related to the native builds?
U-Boot 2017.07-rc3 (Jul 10 2017 - 12:54:03 +0000)
DRAM: 416 MiB
RPI Zero (0x900093)
MMC: sdhci@7e300000: 0
reading uboot.env
** Unable to read "uboot.env" from mmc0:1 **
Using default environment
In: serial
Out: vidconsole
Err: vidconsole
Net: No ethernet found.
starting USB...
USB0: Core Release: 2.80a
scanning bus 0 for devices... 3 USB Device(s) found
scanning usb for storage devices... 0 Storage Device(s) found
Hit any key to stop autoboot: 0
switch to partitions #0, OK
mmc0 is current device
Scanning mmc 0:1...
21968 bytes read in 249 ms (85.9 KiB/s)
Found EFI removable media binary efi/boot/bootarm.efi
reading efi/boot/bootarm.efi
105984 bytes read in 30 ms (3.4 MiB/s)
## Starting EFI application at 01000000 ...
Scanning disk [email protected]...
Found 1 disks
Welcome to GRUB!
data abort
pc : [<18b36628>] lr : [<18b4e178>]
reloc pc : [<febda628>] lr : [<febf2178>]
sp : 19b5c150 ip : 00000074 fp : 00000001
r10: 18b58cb8 r9 : 00000000 r8 : 18b360e4
r7 : 18b36080 r6 : 00000000 r5 : 18b36978 r4 : 19b5c290
r3 : 00000000 r2 : 00000000 r1 : 18b4e478 r0 : 18b36080
Flags: nZCv IRQs off FIQs off Mode SVC_32
Resetting CPU ...
resetting ...
Regards,
Andreas
--
SUSE Linux GmbH, Maxfeldstr. 5, 90409 Nürnberg, Germany
GF: Felix Imendörffer, Jane Smithard, Graham Norton
HRB 21284 (AG Nürnberg)
--
To unsubscribe, e-mail: [email protected]
To contact the owner, e-mail: [email protected]
