Hello Guillaume, On Mon, Nov 20, 2017 at 4:51 PM, Guillaume Gardet <guillaume.gar...@free.fr> wrote: > > > Le 18/11/2017 à 21:12, Misha Komarovskiy a écrit : >> >> Hello Daniel, >> >> On Sat, Oct 7, 2017 at 3:06 PM, Daniel Bischof <suse-b...@bischof.org> >> wrote: >>> >>> Hi, >>> >>> On Mon, 21 Aug 2017, Misha Komarovskiy wrote: >>> >>>> On Sun, Aug 20, 2017 at 3:09 PM, Daniel Bischof <suse-b...@bischof.org> >>>> wrote: >>>>> >>>>> On Mon, 14 Aug 2017, msuchanek wrote: >>>>> >>>>>> On Sat, 12 Aug 2017 14:16:51 +0200 (CEST) Daniel Bischof >>>>>> <suse-b...@bischof.org> wrote: >>>>>> >>>>>>> I tried >>>>>>> openSUSE-Tumbleweed-ARM-XFCE-chromebook.armv7l-2017.07.22-Build1.1 >>>>>>> recently, >>>>>>> but it just beeps and kicks me back to the boot screen immediately. >>>>>>> No >>>>>>> messages on screen, partition resizing, etc. >>>>>>> >>>>>>> Any hints? Some cgpt magic I could try from ChromeOS perhaps? >>>>>> >>>>>> >>>>>> You can try installing upstream u-boot following the chainload steps >>>>>> deteailed in several places on the interwebs - eg here >>>>>> http://chrodyssey.blogspot.cz/2015/04/the-bootloader-chained.html >>>>>> >>>>>> The current u-boot supports display on Snow but the EFI GOP emulation >>>>>> (which the Tumbleweed image would use if it booted) is broken. >>>>>> >>>>>> It probably does not boot because the loader is missing or not marked >>>>>> as >>>>>> bootable or you did not enable USB boot on the chromebook. >>>>>> >>>>>> The developer mode on current versions of ChromeOS has more features >>>>>> than it used to but is also more flaky - it seems services tend to >>>>>> stop >>>>>> working randomly and currently I Cannot boot at all after the devmode >>>>>> installation fell apart. >>>>> >>>>> >>>>> thanks to both of you (Michal and Misha) for your answers, nice to hear >>>>> that you didn't give up on Snow, even since it is no longer available >>>>> for >>>>> purchase. >>>> >>>> >>>> I partly revived my chromebook snow and i was able to test current >>>> Tumbleweed image >>>> >>>> openSUSE-Tumbleweed-ARM-JeOS-chromebook.armv7l-2017.08.13-Build1.6.raw.xz I >>>> found that factory U-Boot for some reason don't like our chainloading >>>> U-BOOT >>>> partition with message: >>>> >>>> GptNextKernelEntry looking at new prio partition 1 >>>> GptNextKernelEntry s1 t5 p10 >>>> GptNextKernelEntry likes partition 1 >>>> Found kernel entry at 2048 size 409604 >>>> Not a valid verified boot key block. >>>> Verifying key block signature failed. >>>> Not a valid verified boot key block. >>>> Verifying key block hash failed. >>>> Marking kernel as invalid. >>>> GptNextKernelEntry looking at new prio partition 1 >>>> GptNextKernelEntry s1 t5 p10 >>>> GptNextKernelEntry no more kernels >>>> >>>> i will try to investigate further why this happen. [...] >>> >>> >>> i tried >>> openSUSE-Tumbleweed-ARM-JeOS-chromebook.armv7l-2017.10.02-Build1.1 >>> today and still no luck. Did you dig into this already? I'm not skilled >>> enough to be helpful in this stage, i'm afraid... >>> >> Guillaume fixed chromebook snow images you can try current TW build >> >> http://download.opensuse.org/repositories/devel:/ARM:/Factory:/Contrib:/Chromebook/images/openSUSE-Tumbleweed-ARM-JeOS-chromebook.armv7l-2017.11.17-Build2.2.raw.xz >> It boots fine here, i only expirienced hard freeze on first boot which >> chanhes partition setup, here is fault output to serial >> uart http://paste.opensuse.org/98361543 >> If it wont reboot for too long on first boot you probably also caught >> this fault just reboot by power key, second boot is fine. > > > It seems that Build2.4 has video output broken. I guess this is due to new > 4.14.0 kernel? > Unfortunately, I do not have any serial access on my chromebook. Could you > have a look, since it seems you have serial on your chromebook. > Or anyone else?
There is hard freeze near 4 of 5 times, here is output from serial http://paste.opensuse.org/96574215 Maybe misconfig in our kernel config or regression in 4.14 need to investigate. > > > Guillaume > > > >>> Best regards, >>> >>> --D. >>> --- >>> Daniel Bischof <suse-b...@bischof.org> >>> -- >>> To unsubscribe, e-mail: opensuse-arm+unsubscr...@opensuse.org >>> To contact the owner, e-mail: opensuse-arm+ow...@opensuse.org >>> >> >> > -- Best Regards, Misha Komarovskiy zombahatgmaildotcom -- To unsubscribe, e-mail: opensuse-arm+unsubscr...@opensuse.org To contact the owner, e-mail: opensuse-arm+ow...@opensuse.org
