Hi Manu, you don't read very well, don't you? ;-)
> What did I try: evrywhere is written, that you have to edit the > raspberry-file in /etc/dracut.d/, but I have no such file. So what do > I edit? Hartmut at Eric and Michael: i had Raspian on my Pi3, because at this time you need it to make the Pi3 boot from USB. I'm working !!! with Suse/openSuse since 1999 on different mashines and I know very well, where all those config-files are and how to handle them, so I want to run the Pi3 with opensuse too .... On Wed, 20 Dec 2017 16:37:31 +0000 Manu Maier <[email protected]> wrote: > There are only two steps necessary to get the wlan up and running: > > 1. Delete "sdhci_iproc" from first line (add_drivers) in > /etc/dracut.conf.d/raspberrypi_modules.conf > > Should then look like this: > add_drivers+=" bcm2835-sdhost bcm2835_dma mmc_block " > # Workaround for Wifi > omit_drivers+=" sdhci-iproc" > > 2. Run "mkinitrd -f" > > Regards, > Manu > > Am 20.12.2017 um 16:03 schrieb Hartmut Krummrei: > > Hello, > > > > I managed to get Opensuse 42.3 running on my Raspi 3. That took my > > just one day. After another day with the effortless tries to get the > > built-in-wifi runnung I am at end. Was anyone able to get the > > wifi-device working? > > > > What did I try: evrywhere is written, that you have to edit the > > raspberry-file in /etc/dracut.d/, but I have no such file. So what do > > I edit? > > > > I tried to manage the listed modules by hand, but if I remove sdhc_ipc > > the system freezes. > > Every package named "raspberry pi" is installed (for pi 3) and bcmxxx > > too. > > > > Other seems to have difficulties too: > > https://lists.opensuse.org/opensuse-arm/2017-08/msg00028.html > > > > Regards, > > > > Hartmut > -- Hartmut Krummrei <[email protected]> -- To unsubscribe, e-mail: [email protected] To contact the owner, e-mail: [email protected]
