Hello Hartmut, my suggestion with the raspberrypi_modules.conf file refers to both Leap 42.2 and 42.3. It should also be present in Leap 42.3. Look here: https://build.opensuse.org/package/view_file/openSUSE:Leap:42.3:Ports/JeOS/config.sh?expand=1 Line: 1310 to 1312
Just create the raspberrypi_modules.conf file with the content and try it out. Regards, Manu Am 29.12.2017 um 12:52 schrieb Hartmut Krummrei: > That was a type-error from me - I meant "etc/dracut.conf.d". That does > not change anything: there is no Raspberry-file which I can edit. > > If you search for that problem with that file, you will find, that > everybody writes about Leap 42.2 not 42.3. So something has changed. > > Hartmut > > > Am 28.12.2017 um 16:17 schrieb Michal Suchánek: >> On Tue, 26 Dec 2017 18:14:08 +0100 >> Hartmut Krummrei<[email protected]> wrote: >> >>> Hi Manu, >>> >>> you don't read very well, don't you? ;-) >> Neither do you :P >>>> What did I try: evrywhere is written, that you have to edit the >>>> raspberry-file in /etc/dracut.d/, but I have no such file. So what >>>> do I edit? >> It's /etc/dracut.conf.d/ >> >> If in doubt use the find utility or tab completion feature. >> >> It worked for me. >> >> Thanks >> >> Michal >> >> >>> On Wed, 20 Dec 2017 16:37:31 +0000 >>> Manu Maier<[email protected]> wrote: >>> >>>> There are only two steps necessary to get the wlan up and running: >>>> >>>> 1. Delete "sdhci_iproc" from first line (add_drivers) in >>>> /etc/dracut.conf.d/raspberrypi_modules.conf >>>> >>>> Should then look like this: >>>> add_drivers+=" bcm2835-sdhost bcm2835_dma mmc_block " >>>> # Workaround for Wifi >>>> omit_drivers+=" sdhci-iproc" >>>> >>>> 2. Run "mkinitrd -f" >>>> >>>> Regards, >>>> Manu >>>> >>>> Am 20.12.2017 um 16:03 schrieb Hartmut Krummrei: >>>>> Hello, >>>>> >>>>> I managed to get Opensuse 42.3 running on my Raspi 3. That took >>>>> my just one day. After another day with the effortless tries to >>>>> get the built-in-wifi runnung I am at end. Was anyone able to get >>>>> the wifi-device working? >>>>> >>>>> What did I try: evrywhere is written, that you have to edit the >>>>> raspberry-file in /etc/dracut.d/, but I have no such file. So >>>>> what do I edit? >>>>> >>>>> I tried to manage the listed modules by hand, but if I remove >>>>> sdhc_ipc the system freezes. >>>>> Every package named "raspberry pi" is installed (for pi 3) and >>>>> bcmxxx too. >>>>> >>>>> Other seems to have difficulties too: >>>>> https://lists.opensuse.org/opensuse-arm/2017-08/msg00028.html >>>>> >>>>> Regards, >>>>> >>>>> Hartmut > -- To unsubscribe, e-mail: [email protected] To contact the owner, e-mail: [email protected]
