> -----Original Message----- > From: Matwey V. Kornilov <[email protected]> > Sent: 07 November 2019 13:46 > To: [email protected] > Subject: [opensuse-arm] Re: tumbleweed on RPi Zero W > > > As far as I remember there is a ticket in the bugzilla according generic > armv6 faluire.
If you are referencing https://bugzilla.opensuse.org/show_bug.cgi?id=1145646 this is not the problem here since we still use grub 2.02. Or is there another bug? Guillaume > > 07.11.2019 13:20, Guillaume Gardet пишет: > > Hi Matthias, > > > >> -----Original Message----- > >> From: Matthias Brugger <[email protected]> > >> Sent: 07 November 2019 10:33 > >> To: Mailinglist openSUSE ARM <[email protected]> > >> Cc: [email protected]; Michael Ströder > >> <[email protected]>; Freek de Kruijf <[email protected]> > >> Subject: [opensuse-arm] tumbleweed on RPi Zero W > >> > >> Hi all, > >> > >> Yesterday I tried openSUSE Tumbleweed image on my RPi Zero W (v1.1) > >> with JeOS image. I was able to boot into grub but didn't see any > >> output from the kernel on the serial console. I saw that console was > >> set to ttyAMA0, I tried also with > >> ttyS0 and ttyS1, as well as with earlycon as described in [1]. But no luck. > >> > >> Was anyone able to boot the newest [2] RPi tumbleweed image just > >> using the serial console, or do I need a monitor on the firstboot? > > > > No, you should be able to boot it with serial only. > > > > I tried this image on a RPi1, with serial and HDMI connected and I have > > nothing > after grub loaded kernel and initrd. > > > > Cheers, > > Guillaume > > > > > >> > >> Regards, > >> Matthias > >> > >> [1] https://en.opensuse.org/HCL:Raspberry_Pi > >> [2] > >> openSUSE-Tumbleweed-ARM-JeOS-raspberrypi.armv6l-2019.10.25- > >> Snapshot20191101.raw.xz > >> -- > >> To unsubscribe, e-mail: [email protected] > >> To contact the owner, e-mail: [email protected] > > > > IMPORTANT NOTICE: The contents of this email and any attachments are > confidential and may also be privileged. If you are not the intended > recipient, > please notify the sender immediately and do not disclose the contents to any > other person, use it for any purpose, or store or copy the information in any > medium. Thank you. > > > > > -- > To unsubscribe, e-mail: [email protected] > To contact the owner, e-mail: [email protected] IMPORTANT NOTICE: The contents of this email and any attachments are confidential and may also be privileged. If you are not the intended recipient, please notify the sender immediately and do not disclose the contents to any other person, use it for any purpose, or store or copy the information in any medium. Thank you.
