12.02.2020 18:37, ITwrx пишет: > On 2/12/20 8:59 AM, ITwrx wrote: >> On 2/12/20 1:49 AM, Matwey V. Kornilov wrote: >>> Hi, >>> >>> It is very strange to hear that. I deployed this image to couple of >>> Rock64-s week ago. >>> So, could you please be more specific? What are you trying to do exactly? >>> >>> You are supposed to download >>> openSUSE-Tumbleweed-ARM-JeOS-rock64.aarch64-2020.01.30-Build5.29.raw.xz >>> uncompress it with `xz -d >>> openSUSE-Tumbleweed-ARM-JeOS-rock64.aarch64-2020.01.30-Build5.29.raw.xz` >>> and write .raw file to microsd card as the following `dd_rescue >>> openSUSE-Tumbleweed-ARM-JeOS-rock64.aarch64-2020.01.30-Build5.29.raw >>> /dev/your_sd_card_here`. >> That's what i did, but i'll try it again. I didn't get any errors when >> writing the image. This time, i'll wipe the sd card and create one fat >> partition, just to be on the safe side. >>> Do you have usb rs232 ttl converter to attach the Rock64 console? What >>> does it say? >> i did, but i don't remember. It didn't get very far. If it fails this >> time, i'll copy and paste the output. >> >> Thanks >> >>> ср, 12 февр. 2020 г. в 10:17, Guillaume Gardet <[email protected]>: >>>> Hi, >>>> >>>>> -----Original Message----- >>>>> From: ITwrx <[email protected]> >>>>> Sent: 12 February 2020 03:49 >>>>> To: [email protected] >>>>> Subject: [opensuse-arm] Rock64 >>>>> >>>>> Thorston/All, >>>>> >>>>> i just wanted to report that there are not Rock64 microOS images, only >>>>> images for >>>>> the older pine64. >>>>> >>>>> Also, the instructions on the Rock64 openSUSE wiki don't work (exactly as >>>>> they >>>>> are), using the below linked image file. I don't know what the >>>>> corresponding >>>>> "packages" file is for or how to use it, so it was not used in any way. >>>>> The Rock64 >>>> The "packages" file is just the list of installed packages in this >>>> *.raw.xz image. >>>> >>>>> openSUSE wiki page didn't mention anything about it. Probably why the >>>>> board >>>>> won't boot... :) >>>>> >>>>> http://download.opensuse.org/repositories/devel:/ARM:/Factory:/Contrib:/Roc >>>>> kchip/images/openSUSE-Tumbleweed-ARM-JeOS-rock64.aarch64-2020.01.30- >>>>> Build5.29.raw.xz >>>>> >>>>> Any tips appreciated. >>>> Added Matwey in Cc who may help. >>>> >>>> Cheers, >>>> Guillaume >>>> >>>>> Thanks, >>>>> >>>>> ITwrx >>>>> >>>>> >>>>> -- >>>>> To unsubscribe, e-mail: [email protected] >>>>> To contact the owner, e-mail: [email protected] > > Ok, i misspoke earlier. The first time i didn't extract, then run > dd_rescue per your instructions. i ran "xzcat [image].raw.xz | dd bs=4M > of=/dev/sdX iflag=fullblock oflag=direct; sync" (substituting relevant > info) per the wiki. This time i did use your commands. I got the same > result and output in the serial console as before. > >> U-Boot TPL 2020.01 (Jan 30 2020 - 10:43:44) >> data training error >> col error >> data training error >> LPDDR3, 800MHz >> BW=16 Col=12 Bk=8 CS0 Row=16 CS=1 Die BW=8 Size=4096MB > I don't know much about Arm, so i don't know what that output means. :)
It is very first stage of bootloader. Do you see anything else next? > > Thanks > > -- To unsubscribe, e-mail: [email protected] To contact the owner, e-mail: [email protected]
