On Wed, 2020-03-11 at 15:41 +0000, Guillaume Gardet wrote: > Hi, > > > -----Original Message----- > > From: Michael Ströder <[email protected]> > > Sent: 11 March 2020 14:40 > > To: [email protected] > > Subject: Re: [opensuse-arm] rpi2 does not boot after update to ARM > > Tumbleweed snapshot 20200226 > > > > On 2/28/20 2:03 PM, Freek de Kruijf wrote: > > > Op vrijdag 28 februari 2020 12:03:40 CET schreef Michael Ströder: > > > > I've updated my Raspberry PI 2 to Tumbleweed snapshot 20200226. > > > > > > > > After the update only the rainbow-colored screen appears but after > > > > that only a black screen, no boot. > > > > > > > > See below the directory listings of /boot and /boot/efi. > > > > > > Did you try with a fresh image on another microSD? > > > > I've now tried a fresh install with [1] but same result. Black screen after > > the > > rainbow screen. > > > > No, I cannot provide serial output because I don't have a serial adaptor. > > U-Boot does not boot at all. It seems to be due to bad DTB on fat partition. > If I replace the DTB by the one from published Leap 15.2 image [1], u-boot and > Linux boot properly. > > I tested latest, unpublished, Leap 15.2 image from [2] and it does not boot > either! > Matthias, Nicolas, any idea what is wrong with latest DTBs? > Maybe DTB from 5.5 branch is not working with RPi2 and/or older kernels?
I'm looking into it. It's curious that the armv7 image works fine with rpi3b. I guess it narrows the error space. Regards, Nicolas
signature.asc
Description: This is a digitally signed message part
