Hello community,
here is the log from the commit of package raspberrypi-firmware for
openSUSE:Factory checked in at 2018-12-07 14:39:34
++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++
Comparing /work/SRC/openSUSE:Factory/raspberrypi-firmware (Old)
and /work/SRC/openSUSE:Factory/.raspberrypi-firmware.new.19453 (New)
++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++
Package is "raspberrypi-firmware"
Fri Dec 7 14:39:34 2018 rev:39 rq:655977 version:2018.11.05
Changes:
--------
---
/work/SRC/openSUSE:Factory/raspberrypi-firmware/raspberrypi-firmware-config.changes
2018-11-20 22:44:47.426229600 +0100
+++
/work/SRC/openSUSE:Factory/.raspberrypi-firmware.new.19453/raspberrypi-firmware-config.changes
2018-12-07 14:39:42.522750876 +0100
@@ -1,0 +2,6 @@
+Fri Nov 30 12:50:54 UTC 2018 - Nicolas Patricio Saenz Julienne
<[email protected]>
+
+- Removed upstream-mmc and rpi3-hdmi overlays as not needed anymore
+- Added conflict statment to avoid issues with older kernels
+
+-------------------------------------------------------------------
raspberrypi-firmware.changes: same change
++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++
Other differences:
------------------
++++++ raspberrypi-firmware-config.spec ++++++
--- /var/tmp/diff_new_pack.K32U8F/_old 2018-12-07 14:39:44.038748999 +0100
+++ /var/tmp/diff_new_pack.K32U8F/_new 2018-12-07 14:39:44.038748999 +0100
@@ -26,6 +26,7 @@
Source: config.txt
BuildRequires: raspberrypi-firmware
Requires: raspberrypi-firmware = %{version}
+Conflicts: kernel < 4.12.14
Conflicts: otherproviders(raspberrypi-firmware-config)
Provides: raspberrypi-firmware-branding-openSUSE = %{version}
Obsoletes: raspberrypi-firmware-branding-openSUSE < %{version}
++++++ config.txt ++++++
--- /var/tmp/diff_new_pack.K32U8F/_old 2018-12-07 14:39:44.078748949 +0100
+++ /var/tmp/diff_new_pack.K32U8F/_new 2018-12-07 14:39:44.078748949 +0100
@@ -30,7 +30,6 @@
# This overlay fixes divergences between the RPi device tree and what
# upstream provides
dtoverlay=upstream
-dtoverlay=upstream-mmc
dtoverlay=upstream-aux-interrupt
[pi1]
@@ -44,14 +43,8 @@
# SDRAM freq (default 400)
sdram_freq=400
-
[pi3]
-# Older kernels didn't support HDMI connection detection on the rpi3, so force
-# HDMI to always plugged in there. This overlay is only effective on rpi3.
-dtoverlay=rpi3-hdmi
-
-
[all]
# Allow u-boot to set arm_control
