Hello community,
here is the log from the commit of package raspberrypi-firmware for
openSUSE:Factory checked in at 2019-11-20 10:30:10
++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++
Comparing /work/SRC/openSUSE:Factory/raspberrypi-firmware (Old)
and /work/SRC/openSUSE:Factory/.raspberrypi-firmware.new.26869 (New)
++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++
Package is "raspberrypi-firmware"
Wed Nov 20 10:30:10 2019 rev:51 rq:749830 version:2019.11.06
Changes:
--------
---
/work/SRC/openSUSE:Factory/raspberrypi-firmware/raspberrypi-firmware-config.changes
2019-11-19 12:59:37.310122841 +0100
+++
/work/SRC/openSUSE:Factory/.raspberrypi-firmware.new.26869/raspberrypi-firmware-config.changes
2019-11-20 10:30:10.754597460 +0100
@@ -1,0 +2,8 @@
+Fri Nov 15 21:17:32 UTC 2019 - Matthias Brugger <[email protected]>
+
+- config changes for RPi3:
+ * delete upstream-aux-interrupt as not present anymore
+ * set arm_control for RPi3 only
+ * add RPi3 overlays
+
+-------------------------------------------------------------------
raspberrypi-firmware.changes: same change
++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++
Other differences:
------------------
raspberrypi-firmware.spec: same change
++++++ config.txt ++++++
--- /var/tmp/diff_new_pack.q7ATt9/_old 2019-11-20 10:30:13.794598065 +0100
+++ /var/tmp/diff_new_pack.q7ATt9/_new 2019-11-20 10:30:13.798598066 +0100
@@ -30,7 +30,6 @@
# This overlay fixes divergences between the RPi device tree and what
# upstream provides
dtoverlay=upstream
-dtoverlay=upstream-aux-interrupt
[pi1]
@@ -45,6 +44,12 @@
[pi3]
+arm_control=0x200
+
+# These are not applied automatically? Needed to use respective upstream
drivers.
+dtoverlay=vc4-kms-v3d
+dtoverlay=dwc2
+
[pi4]
arm_64bit=1
dtoverlay=disable-vc4
