Hello community,
here is the log from the commit of package raspberrypi-firmware for
openSUSE:Factory checked in at 2019-11-28 10:14:26
++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++
Comparing /work/SRC/openSUSE:Factory/raspberrypi-firmware (Old)
and /work/SRC/openSUSE:Factory/.raspberrypi-firmware.new.26869 (New)
++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++
Package is "raspberrypi-firmware"
Thu Nov 28 10:14:26 2019 rev:52 rq:751286 version:2019.11.19
Changes:
--------
---
/work/SRC/openSUSE:Factory/raspberrypi-firmware/raspberrypi-firmware-config.changes
2019-11-20 10:30:10.754597460 +0100
+++
/work/SRC/openSUSE:Factory/.raspberrypi-firmware.new.26869/raspberrypi-firmware-config.changes
2019-11-28 10:15:05.631637758 +0100
@@ -1,0 +2,33 @@
+Tue Nov 26 17:30:58 UTC 2019 - Nicolas Patricio Saenz Julienne
<[email protected]>
+
+- Enable rpi4-cma dt overlay to properly setup CMA on that platform (SLE-7771)
+- Enable rpi4-pcie-ib-size-fix dt overlay to properly setup PCIe on that
+ platform (SLE-7771)
+
+-------------------------------------------------------------------
+Tue Nov 26 16:13:12 UTC 2019 - Guillaume GARDET <[email protected]>
+
+- Update to 6e4a7232c (2019-11-19):
+ * firmware: platform: Differentiate between boostable and turbo clocks
+ * firmware: arm_dt: Set WL_ON and BT_ON from .dtb
+ * firmware: Fixup chosing of bit depth in legacy graphics
+ See: raspberrypi/linux#3331
+ * firmware: vec: Setup WideScreen Signalling outside of copy protection
+ See: https://www.raspberrypi.org/forums/viewtopic.php?f=28&t=256489
+ * firmware: Add global reset mailbox
+ * firmware: 2711: De-couple start.elf clock setup from the bootloader
+ * firmware: scaler: Correct defines for SCALER_POS0_START_Y_[MASK|SHIFT]
(HVS4)
+ * firmware: platform: Fix missing HDMI PHY power down bit
+ * firmware: Reduce voltage as part of DVFS
+ * firmware: arm-loader: Inherit 2711 mac-address from the bootloader
+ See: http://git/vc4/vc4/merge_requests/687
+ * firmware: arm_loader: Respect all required frequencies when throttling
+ * firmware: Fixup vcgencmd display_power return values
+
+-------------------------------------------------------------------
+Mon Nov 25 16:19:23 UTC 2019 - Matthias Brugger <[email protected]>
+
+- If booting RPi in arm64 mode or not will be set by u-boot through
+ ubootconfig.txt. This allows to build u-boot for RPi3/4 with 32-bit.
+
+-------------------------------------------------------------------
raspberrypi-firmware.changes: same change
Old:
----
raspberrypi-firmware-2019.11.06.tar.bz2
New:
----
raspberrypi-firmware-2019.11.19.tar.bz2
++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++
Other differences:
------------------
++++++ raspberrypi-firmware-config.spec ++++++
--- /var/tmp/diff_new_pack.lgRNoT/_old 2019-11-28 10:15:06.351637766 +0100
+++ /var/tmp/diff_new_pack.lgRNoT/_new 2019-11-28 10:15:06.351637766 +0100
@@ -1,7 +1,7 @@
#
# spec file for package raspberrypi-firmware-config
#
-# Copyright (c) 2019 SUSE LLC.
+# Copyright (c) 2019 SUSE LLC
#
# All modifications and additions to the file contributed by third parties
# remain the property of their copyright owners, unless otherwise agreed
@@ -17,7 +17,7 @@
Name: raspberrypi-firmware-config
-Version: 2019.11.06
+Version: 2019.11.19
Release: 0
Summary: Configuration for the Raspberry Pi firmware loader
License: MIT
++++++ raspberrypi-firmware.spec ++++++
--- /var/tmp/diff_new_pack.lgRNoT/_old 2019-11-28 10:15:06.395637766 +0100
+++ /var/tmp/diff_new_pack.lgRNoT/_new 2019-11-28 10:15:06.399637766 +0100
@@ -1,7 +1,7 @@
#
# spec file for package raspberrypi-firmware
#
-# Copyright (c) 2019 SUSE LLC.
+# Copyright (c) 2019 SUSE LLC
#
# All modifications and additions to the file contributed by third parties
# remain the property of their copyright owners, unless otherwise agreed
@@ -17,7 +17,7 @@
Name: raspberrypi-firmware
-Version: 2019.11.06
+Version: 2019.11.19
Release: 0
Summary: Binary bootloader and firmware files for Raspberry Pi
License: SUSE-Firmware
++++++ config.txt ++++++
--- /var/tmp/diff_new_pack.lgRNoT/_old 2019-11-28 10:15:06.427637766 +0100
+++ /var/tmp/diff_new_pack.lgRNoT/_new 2019-11-28 10:15:06.427637766 +0100
@@ -44,15 +44,15 @@
[pi3]
-arm_control=0x200
-
# These are not applied automatically? Needed to use respective upstream
drivers.
dtoverlay=vc4-kms-v3d
dtoverlay=dwc2
[pi4]
-arm_64bit=1
+
dtoverlay=disable-vc4
+dtoverlay=rpi4-cma
+dtoverlay=rpi4-pcie-ib-size-fix
[all]
++++++ raspberrypi-firmware-2019.11.06.tar.bz2 ->
raspberrypi-firmware-2019.11.19.tar.bz2 ++++++
/work/SRC/openSUSE:Factory/raspberrypi-firmware/raspberrypi-firmware-2019.11.06.tar.bz2
/work/SRC/openSUSE:Factory/.raspberrypi-firmware.new.26869/raspberrypi-firmware-2019.11.19.tar.bz2
differ: char 11, line 1
