John Rittinghouse wrote:
Hi list,
I just moved from Linspire to Suse 10 and like the transition very
much. Everything works pretty well from the install but I cannot seem
to get the WLAN to work. I can hit the Access point from any other
machine and get to the Internet fine, but with Suse, I can hit the
config screen on the Access Point and configure, etc. but still cannot
get out to the Internet. The card is configured correctly using
64-bit WEP and it is recognized by the kwifimanager program with an
excellent signal and a valid IP address assigned with DHCP from the
AP. I must be overlooking something but am baffled at this point.
Can someone shed some light on why I cannot get out to the internet?
Many thanks in advance.
Hi John,
Jave you checked if DNS name resolution works correct?
Are there valid DNS servers in your /etc/resolv.conf?
You receive them by DHCP?
Try to connect to something like http://212.203.69.7 (so no dns is required)
I guess on such a failure as you say you can access the web interface of
your AP (probably using it's IP) so it might be such a cause... in other
cases I would try to check the routing table using 'route print'
Greetings
Dominique
---------------------------------------------------------------------
To unsubscribe, e-mail: [EMAIL PROTECTED]
For additional commands, e-mail: [EMAIL PROTECTED]
