I just installed opensuse 10.1 on my Dell D820 with centrino wireless.
It works great on my work wireless/wired network. A hotel wireless
network worked using NetworkManager, very nice.
But my home network, my Belkin wireless AP/router, only works half-way.
I just can't figure it out. I get the DHCP, /etc/resolv.conf is fixed
up, but _no DNS_. It just will not reslove any names and I have to use
Windows at home all the time (crap!). Here are some tests I did, any
help is appreciated...
air:~ # traceroute 68.230.242.25
traceroute to 68.230.242.25 (68.230.242.25), 30 hops max, 40 byte packets
1 72.204.0.1 (72.204.0.1) 39.833 ms 84.148 ms 123.279 ms
2 70.182.122.81 (70.182.122.81) 164.551 ms 204.646 ms 223.926 ms
3 70.182.120.53 (70.182.120.53) 246.128 ms 242.495 ms
70.182.120.145 (70.182.120.145) 239.993 ms
4 70.183.71.49 (70.183.71.49) 236.488 ms 232.773 ms 47.034 ms
5 68.230.242.25 (68.230.242.25) 45.589 ms 112.184 ms 199.172 ms
air:~ # cat /etc/resolv.conf
### BEGIN INFO
#
# Modified_by: NetworkManager
# Process: /usr/bin/NetworkManager
# Process_id: 2884
#
### END INFO
search ks.cox.net
nameserver 68.230.242.25
nameserver 68.230.242.30
nameserver 68.12.16.30
air:~ # ifconfig eth1
eth1 Link encap:Ethernet HWaddr 00:18:DE:17:4A:0C
inet addr:192.168.2.5 Bcast:192.168.2.255 Mask:255.255.255.0
inet6 addr: fe80::218:deff:fe17:4a0c/64 Scope:Link
UP BROADCAST RUNNING MULTICAST MTU:1500 Metric:1
RX packets:9656 errors:0 dropped:15 overruns:0 frame:0
TX packets:764 errors:0 dropped:0 overruns:0 carrier:0
collisions:0 txqueuelen:1000
RX bytes:212919 (207.9 Kb) TX bytes:60571 (59.1 Kb)
Interrupt:177 Base address:0x6000 Memory:dcfff000-dcffffff
air:~ # netstat -r
Kernel IP routing table
Destination Gateway Genmask Flags MSS Window irtt
Iface
192.168.2.0 * 255.255.255.0 U 0 0 0
eth1
loopback * 255.0.0.0 U 0 0 0 lo
default 192.168.2.1 0.0.0.0 UG 0 0 0
eth1
air:~ # nslookup www.cox.net
;; connection timed out; no servers could be reached
---------------------------------------------------------------------
To unsubscribe, e-mail: [EMAIL PROTECTED]
For additional commands, e-mail: [EMAIL PROTECTED]
