On openSUSE 10.2, if I run "hwinfo --gfxcard", I get:
26: PCI 100.0: 0300 VGA compatible controller (VGA)
[Created at pci.286]
UDI: /org/freedesktop/Hal/devices/pci_10de_141
Unique ID: VCu0.M9cbAH2MFA0
Parent ID: vSkL.76Y+ZaqIO10
SysFS ID: /devices/pci0000:00/0000:00:01.0/0000:01:00.0
SysFS BusID: 0000:01:00.0
Hardware Class: graphics card
Model: "ASUSTeK GeForce 6600"
Vendor: pci 0x10de "nVidia Corporation"
Device: pci 0x0141 "GeForce 6600"
SubVendor: pci 0x1043 "ASUSTeK Computer Inc."
SubDevice: pci 0x8199
Revision: 0xa2
Memory Range: 0xf4000000-0xf7ffffff (rw,non-prefetchable)
Memory Range: 0xd8000000-0xdfffffff (rw,prefetchable)
Memory Range: 0xfa000000-0xfaffffff (rw,non-prefetchable)
Memory Range: 0xf8000000-0xf801ffff (ro,prefetchable,disabled)
IRQ: 5 (no events)
I/O Ports: 0x3c0-0x3df (rw)
Module Alias: "pci:v000010DEd00000141sv00001043sd00008199bc03sc00i00"
Driver Info #0:
XFree86 v4 Server Module: nv
Driver Info #1:
XFree86 v4 Server Module: nvidia
3D Support: yes
Config Status: cfg=yes, avail=yes, need=yes, active=unknown
Attached to: #12 (PCI bridge)
My question is why there is a "Driver Info #0" as well as a "Driver Info
#1" entry.
My xorg.conf contains:
Section "Device"
BoardName "GeForce 6600"
BusID "1:0:0"
Driver "nv"
Identifier "Device[0]"
Option "XaaNoOffScreenPixmaps" "on"
Option "XaaNoPixmapCache" "on"
Screen 0
VendorName "NVidia"
EndSection
So I expect the #0 entry. I do not expect the #1 entry. I would have
expected it to be an either/or thing, but not both drivers.
--
Roger Oberholtzer
OPQ Systems / Ramböll RST
Ramböll Sverige AB
Kapellgränd 7
P.O. Box 4205
SE-102 65 Stockholm, Sweden
Tel: Int +46 8-615 60 20
Fax: Int +46 8-31 42 23
--
To unsubscribe, e-mail: [EMAIL PROTECTED]
For additional commands, e-mail: [EMAIL PROTECTED]
