Roger Oberholtzer wrote / napísal(a): > On openSUSE 10.2, if I run "hwinfo --gfxcard", I get: > > 26: PCI 100.0: 0300 VGA compatible controller (VGA) > [Created at pci.286] > UDI: /org/freedesktop/Hal/devices/pci_10de_141 > Unique ID: VCu0.M9cbAH2MFA0 > Parent ID: vSkL.76Y+ZaqIO10 > SysFS ID: /devices/pci0000:00/0000:00:01.0/0000:01:00.0 > SysFS BusID: 0000:01:00.0 > Hardware Class: graphics card > Model: "ASUSTeK GeForce 6600" > Vendor: pci 0x10de "nVidia Corporation" > Device: pci 0x0141 "GeForce 6600" > SubVendor: pci 0x1043 "ASUSTeK Computer Inc." > SubDevice: pci 0x8199 > Revision: 0xa2 > Memory Range: 0xf4000000-0xf7ffffff (rw,non-prefetchable) > Memory Range: 0xd8000000-0xdfffffff (rw,prefetchable) > Memory Range: 0xfa000000-0xfaffffff (rw,non-prefetchable) > Memory Range: 0xf8000000-0xf801ffff (ro,prefetchable,disabled) > IRQ: 5 (no events) > I/O Ports: 0x3c0-0x3df (rw) > Module Alias: "pci:v000010DEd00000141sv00001043sd00008199bc03sc00i00" > Driver Info #0: > XFree86 v4 Server Module: nv > Driver Info #1: > XFree86 v4 Server Module: nvidia > 3D Support: yes > Config Status: cfg=yes, avail=yes, need=yes, active=unknown > Attached to: #12 (PCI bridge) > > My question is why there is a "Driver Info #0" as well as a "Driver Info > #1" entry. > > My xorg.conf contains: > > Section "Device" > BoardName "GeForce 6600" > BusID "1:0:0" > Driver "nv" > Identifier "Device[0]" > Option "XaaNoOffScreenPixmaps" "on" > Option "XaaNoPixmapCache" "on" > Screen 0 > VendorName "NVidia" > EndSection > > So I expect the #0 entry. I do not expect the #1 entry. I would have > expected it to be an either/or thing, but not both drivers. >
There should be both of them. What you're missing are sections "Driver Status" (active/not active) Can you fill bugreport for that? -- Best Regards, Michal Zugec Software developer --------------------------------------------------------------------- SuSE CR, s.r.o. e-mail: [EMAIL PROTECTED] Lihovarska 1060/12 tel: +420 284 028 960 190 00 Praha 9 fax: +420 296 542 374 Czech Republic http://www.suse.cz/ -- To unsubscribe, e-mail: [EMAIL PROTECTED] For additional commands, e-mail: [EMAIL PROTECTED]
