On Wednesday 26 September 2007 08:01:09 pm David C. Rankin wrote:
> Ron Eggler wrote:
> > On Wednesday 26 September 2007 10:21:45 am David C. Rankin wrote:
> >> Ron Eggler wrote:
> >>> Hi,
> >>>
> >>> Okay, after playing around a little bit for a while i still gotta come
> >>> and ask here. I got my printer setup on my suse 10.1 server system and
> >>> i can print just fine with my Suse 10.2 client but not with the Windows
> >>> client(s). In Windows i can browse for the printer and it shows it up
> >>> nicely.
> >>> Double click tells me that it'll download the driver to the system but
> >>> then it still can't find it and i will need to install it manually.
> >>> Anyways, once done this, i can nicely add it to my windows printer(s)
> >>> but when i try to print something it tells me "Access denied, unable to
> >>> connect". I'm not reallly sure what's wrong since i can print from my
> >>> suse 10.2 client just fine. Can anyone help me? This would be
> >>> appreciated!
> >>> Thanks tons!
> >>
> >> Ron,
> >>
> >> I don't know if my original post got through, if so I apologize, but in
> >> addition to the above make sure you see "man lppasswd" and make sure the
> >> windows user and password have an entry in lppasswd because windows
> >> tries to auth by sending the windows login and password.
> >
> > Really? Can't i just open it up for the whole network with no
> > authentication? Does every Windows user need to be added?
> > I tried:
> > lppasswd -a 'Ron Eggler' and got this:
> > server:~ # lppasswd -a 'Ron Eggler'
> > Enter password: {no password so i hit [enter]}
> > Enter password again: {[enter] again}
> > lppasswd: Sorry, password rejected.
> > Your password must be at least 6 characters long, cannot contain
> > your username, and must contain at least one letter and number.
> > server:~ #
> >
> > So does it require a Windows password? Hmm weird, there must be a
> > possibility to just open it up somehow i think, no?
>
> Ron
>
> There is and that is/should be the default! See /etc/cups/cups.conf:
>
> <Location /printers/name>
> #
> # You may wish to limit access to printers and classes, either with Allow
> # and Deny lines, or by requiring a username and password.
> #
>
> ## Anonymous access (default)
> AuthType None
>
> ## Require a username and password (Basic authentication)
> #AuthType Basic
> #AuthClass User
>
> ## Require a username and password (Digest/MD5 authentication)
> #AuthType Digest
> #AuthClass User
>
> ## Restrict access to local domain
> #Order Deny,Allow
> #Deny From All
> #Allow From .mydomain.com
> </Location>
confirm sbove section, looks similar on my system
>
> <Location /admin>
> #
> # You definitely will want to limit access to the administration functions.
> # The default configuration requires a local connection from a user who
> # is a member of the system group to do any admin tasks. You can change
> # the group name using the SystemGroup directive.
> #
>
> AuthType BasicDigest
Ah here I have AuthType Basic. Try adding Digest
> AuthClass Group
> AuthGroupName sys
>
> ## Restrict access to local domain
> Order Deny,Allow
> Deny From All
> Allow From 127.0.0.1
I allow from 192.168.0.* (so I can control it from he whole subnet)
> Allow From @LOCAL
> Allow From 66.76.63.60
Don't have above two lines
>
> Encryption Required
> </Location>
Okay, changed above line by adding digest, restarted cups but in Windows it
still says "Access denied, unable to connect" isn't this weird? :o
>
> P.S. How did the intel video 1680x1050 problem come out???
Oh, didn't get it working, i'm still on 1280x1024 but i've purchsed a GeForce
7300 card on ebay which is stuck in a PostOffice in NewYork :( ... No idea
how long it would take till it gets here...
Thanks for any further help to get the printer issue sorted out. Getting back
to my graphics later :)
--
chEErs Ron
--
To unsubscribe, e-mail: [EMAIL PROTECTED]
For additional commands, e-mail: [EMAIL PROTECTED]
