hi Chris Chris Arnold schrieb: > I am having trouble installing SLES10 SP1 onto a Dell poweredge 4300 > server with a PERC2 RAID card. I have made all 6 drives into a RAID5 and > initialized the logical drive. Then i boot off the SLES10 SP1 CD and and > i get an error "no hard disks were found. Check hardware and try again". > I was able to install SLES9 without any problems and any other OS will > recognize the RAID5 drives. The BIOS of the PERC2 does not seem to be > the problem. I can also abort the install and try to load the megaraid > driver but this never works either.Why won't SLES10 SP1 recognize the > logical drive? > it seems that there is no kernel modul available for you controller. I think you ne to load aacraid. Try to change during the installation (select language oder keyboard) to console and type modprobe aacraid. Have you checked the hardware compatibility list? Look here http://linux.dell.com
cu Joe -- To unsubscribe, e-mail: [EMAIL PROTECTED] For additional commands, e-mail: [EMAIL PROTECTED]
