-----BEGIN PGP SIGNED MESSAGE----- Hash: SHA1 Matthew Stringer wrote: > Since upgrading to 10.3 I've not been able to burn CD's (DVD's are fine), > I've > tried this on several machines all with the same problem, didn't have > problems on earlier versions of SUSE.. > > I tried installing cdrecord which enabled me to write CD's via the command > line but K3B is still broken. > > From the command line wodim gives me: > > wodim -v -eject speed=16 driveropts=burnproof dev=/dev/scd1 ~/cd.iso > wodim: No write mode specified. > wodim: Asuming -tao mode. > wodim: Future versions of wodim may have different drive dependent defaults. > TOC Type: 1 = CD-ROM > scsidev: '/dev/scd1' > devname: '/dev/scd1' > scsibus: -2 target: -2 lun: -2 > Linux sg driver version: 3.5.27 > Wodim version: 1.1.6 > Driveropts: 'burnproof' > SCSI buffer size: 64512 > Device type : Removable CD-ROM > Version : 5 > Response Format: 2 > Capabilities : > Vendor_info : 'ATAPI ' > Identification : 'CD-R/RW 24X10 ' > Revision : 'P.MJ' > Device seems to be: Generic mmc CD-RW. > Using generic SCSI-3/mmc CD-R/CD-RW driver (mmc_cdr). > Driver flags : MMC SWABAUDIO BURNFREE > Supported modes: TAO PACKET SAO RAW/R16 RAW/R96R > Drive buf size : 1630208 = 1592 KB > Beginning DMA speed test. Set CDR_NODMATEST environment variable if device > communication breaks or freezes immediately after that. > FIFO size : 4194304 = 4096 KB > Track 01: data 188 MB > Total size: 217 MB (21:30.24) = 96768 sectors > Lout start: 217 MB (21:32/18) = 96768 sectors > Current Secsize: 2048 > ATIP info from disk: > Indicated writing power: 4 > Is not unrestricted > Is not erasable > Disk sub type: Medium Type C, low Beta category (C-) (6) > ATIP start of lead in: -11559 (97:27/66) > ATIP start of lead out: 359846 (79:59/71) > Disk type: Short strategy type (Phthalocyanine or similar) > Manuf. index: 21 > Manufacturer: Ricoh Company Limited > Blocks total: 359846 Blocks current: 359846 Blocks remaining: 263078 > Speed set to 2816 KB/s > Starting to write CD/DVD at speed 16.0 in real TAO mode for single session. > Last chance to quit, starting real write i 0 seconds. Operation starts. > Waiting for reader process to fill input buffer ... input buffer ready. > Performing OPC... > Starting new track at sector: 0 > Track 01: 1 of 188 MB written (fifo 100%) [buf 66%] 0.9x.Errno: 5 > (Input/ output > error), write_g1 scsi sendcmd: no error > CDB: 2A 00 00 00 03 07 00 00 1F 00 > status: 0x2 (CHECK CONDITION) > Sense Bytes: FF FF FF FF FF FF FF FF FF FF FF FF FF FF FF FF > Sense Key: 0xF Reserved, Segment 255 > Sense Code: 0xFF Qual 0xFF (vendor unique sense code 0xFF) [No matching > qualifie r] Fru > 0xFF > Sense flags: Blk -1 (valid) file mark detected end of medium illegal block > lengt h > cmd finished after 1.602s timeout 40s > > write track data: error after 1587200 bytes > wodim: A write error occured. > wodim: Please properly read the error message above. > Writing time: 19.116s > Average write speed 67.6x. > Fixating... > Fixating time: 44.059s > wodim: fifo had 89 puts and 26 gets. > wodim: fifo was 0 times empty and 14 times full, min fill was 92%. > > Thought about uninstalling all the CD/DVD packages and then installing the > ones from 10.2 but if there's a simpler solution then it would be helpful. > > Regards > > Matthew
What does wodim -prcap dev=/dev/scd1 report? according to my wodim man page burnproof is not a driveropts option so I have no idea why this being accepted... - -- ============================================================================== I have always wished that my computer would be as easy to use as my telephone. My wish has come true. I no longer know how to use my telephone. Bjarne Stroustrup ============================================================================== -----BEGIN PGP SIGNATURE----- Version: GnuPG v1.4.5 (GNU/Linux) Comment: Using GnuPG with SUSE - http://enigmail.mozdev.org iD8DBQFHPICqasN0sSnLmgIRAkjnAJ9wU1PLDwzBVEKi6+oVByv/fvcWgQCgrN8T QsuIqbYd38m4SidDhrWxS/U= =dzQS -----END PGP SIGNATURE----- -- To unsubscribe, e-mail: [EMAIL PROTECTED] For additional commands, e-mail: [EMAIL PROTECTED]
