Matthew Stringer wrote: > On Tuesday 04 December 2007 12:48:46 Jim Flanagan wrote: > >> Hi, >> >> On my new 10.3 install I set up 2 drives in raid1 mirror, using software >> raid in yast. All seems to be working fine except in Kinfocenter>memory >> swap is shown as not available. Yast shows swap with an "*" beside it. >> My partitions are set up as follows: >> primary >> /dev/md0 /boot >> extended >> /dev/md1 /swap >> /dev/md2 / >> /dev/md3 /home >> /dev/md4 /share >> >> I'm not that familiar with tweaking swap and have only set it up in >> yast>partitioner before with no previous problems. This is my first raid >> setup so there may be an issue with that, but again, all others >> partitions are working fine. I tried editing swap in yast to format it >> again as /swap but it failed with an error code -3004. >> >> Anyone know what this problem may be? >> >> Many thanks, >> >> JIm F >> > > I don't normally SoftRAID the swap partitions as it would be faster just to > have multiple ones instead (you're not limited to one). > > Have you tried tryping swapon /dev/md1 to see if it starts working? > > Matthew > > Running swapon /dev/md1 returns "invalid argument". I looked at swapon --help but am unsure which option I should choose.
Jim F -- To unsubscribe, e-mail: [EMAIL PROTECTED] For additional commands, e-mail: [EMAIL PROTECTED]
