On Dec 17, 2007 9:39 AM, Matt T. <[EMAIL PROTECTED]> wrote: > > - Install the rt2x00 module for your kernel; probably a reboot is helpful > after that > > - do not load ndiswrapper, unload it if needed, and make sure it does not get > loaded when rebooting. This might not matter as long as you have no win > drivers for the DWL-G122 installed, but better be sure, and you won't need > them anyway.
I'll start it over with the installation, so there's no ndiswrapper module loaded and i got a clear and fresh install. Since some one told me his success setting the same device, i compiled the rt73 driver (i used the daily CVS http://rt2×00.serialmonkey.com/rt73-cvs-daily.tar.gz), set it up with knetworkmanager and finally got the device worked. I don't know why, suddenly i went off line, the "act" led went off (the link is still on without blinking). I tried to restart the network service it stuck, the restarting process got hang. And so does the KDE applet (knetworkmanager). I re-pluged the device it went back normal but only for a few minutes. I tried to configure the network using traditional ifup (using YAST), I still get the same problem, it only allow me to online for several minutes. What should i check? Did i install the incorrect driver? Any idea what happened? One more thing, When i compiled the driver, the device was plugged (I forgot to unplug it). Is this mean something? Thanks, Adinda P -- To unsubscribe, e-mail: [EMAIL PROTECTED] For additional commands, e-mail: [EMAIL PROTECTED]
