On Thursday 27 December 2007, Adinda Praditya wrote: > On Dec 17, 2007 9:39 AM, Matt T. <[EMAIL PROTECTED]> wrote: > > - Install the rt2x00 module for your kernel; probably a reboot is helpful > > after that > > > > - do not load ndiswrapper, unload it if needed, and make sure it does not > > get loaded when rebooting. This might not matter as long as you have no > > win drivers for the DWL-G122 installed, but better be sure, and you won't > > need them anyway. > > I'll start it over with the installation, so there's no ndiswrapper > module loaded and i got a clear and fresh install. Since some one told > me his success setting the same device, i compiled the rt73 driver (i > used the daily CVS > http://rt2�00.serialmonkey.com/rt73-cvs-daily.tar.gz), set it up with > knetworkmanager and finally got the device worked. > > I don't know why, suddenly i went off line, the "act" led went off > (the link is still on without blinking). I tried to restart the > network service it stuck, the restarting process got hang. And so does > the KDE applet (knetworkmanager). > > I re-pluged the device it went back normal but only for a few minutes. > I tried to configure the network using traditional ifup (using YAST), > I still get the same problem, it only allow me to online for several > minutes. > > What should i check? Did i install the incorrect driver? Any idea what > happened? One more thing, When i compiled the driver, the device was > plugged (I forgot to unplug it). Is this mean something? > > Thanks, > > Adinda P
I had a similar occasional freeze at one out of 2 wireless networks I use. I had to disable and enable again wirelss, or even to completely restart networkmanager, dunno anymore. However before I could investigate further, the problem disappeared. There is a chance that my regular upgrades to the latest SuSE released software, including the kernel, did make the problem go away without further effort :) Sorry to have no other advice, it just works and works. Matt -- To unsubscribe, e-mail: [EMAIL PROTECTED] For additional commands, e-mail: [EMAIL PROTECTED]
