Tom Patton a écrit :
On Thu, 2008-01-03 at 18:59 +0100, jdd wrote:
Wolfgang Woehl a écrit :
Donnerstag, 3. Januar 2008 jdd:
did you try to remove the line yourself in the file or to load the
module manually after booting?
jdd, did you actually read my message?
I see:
I simply open a root console, and "modprobe bttv". Both cards then
return to service...without having to go into YAST for anything.
so this don't seems to be a stopper. if this IS a workaround it should
be fine to note it in bugzilla, but I have no tv card to test it
That was me with the modprobe bttv comment...then someone else pointed
out the blacklist issue. I have removed the lines, but have not had to
reboot yet to see if that fixed it. I agree, it is easily dealt with as
is...at least for me. I guess it would be a problem if I am not home
and the power fails...the wife would not have root access to restore the
camera system. I'll reboot tomorrow morning and advise if it then
auto-loads bttv.
Tom in NM
it's possible to make a small script to do this automatically - may be
add it in boot.local.
some years ago I had similar problem with the connection, I needed to
launch the conection a long time *after* boot was finished. I did
create a "boot.final" script lauched at the appreopriate time
(boot.local is executed very early in the process)
jdd
--
To unsubscribe, e-mail: [EMAIL PROTECTED]
For additional commands, e-mail: [EMAIL PROTECTED]
