hi gunar,

first of all you should really try to figure out if there is an appropriate 
Xorg driver for your graphics card available.
your /var/log/Xorg.0.log shows that auto-detection has failed and it's using 
VESA driver as fallback.

what's the output of "lspci" and "lspci -n"?


cheers,
martin

Am 28.06.2010 09:48, schrieb gunar.dieri...@infineon.com:
> Hi,
>
> I have problems to set my client X config to my monitors standard resolution 
> of 1280x1024. I setup a new device with Resolution: 1280x1024. Then I added 
> Refresh rate: 60Hz and finally Modeline: "1280x1024" 109.62  1280 1336 1472 
> 1720  1024 1024 1026 1062.
>
> DDC is working fine, vsync 56-76, hsync 30-81. I tested it also on different 
> monitors.
> Whatever I set, everytime the monitor starts with 1024x768 resolution. In 
> /var/log/Xorg.0.log I found this:
>
> ...
> (II) VESA(0): Generic Monitor: Using default hsync range of 30.00-81.00 kHz
> (II) VESA(0): Generic Monitor: Using default vrefresh range of 56.00-76.00 Hz
> (II) VESA(0): Not using built-in mode "1280x1024" (width too large for 
> virtual size)
> ...
>
> When I change the local xorg.conf and restart the X server it works perfectly 
> with 1280x1024.
>
> Cheers,
> Gunar
>
>
> ------------------------------------------------------------------------------
> This SF.net email is sponsored by Sprint
> What will you do first with EVO, the first 4G phone?
> Visit sprint.com/first -- http://p.sf.net/sfu/sprint-com-first
> _______________________________________________
> The Open Source Thin Client Solution http://openthinclient.org
> openthinclient-user@lists.sourceforge.net
> https://lists.sourceforge.net/lists/listinfo/openthinclient-user


------------------------------------------------------------------------------
This SF.net email is sponsored by Sprint
What will you do first with EVO, the first 4G phone?
Visit sprint.com/first -- http://p.sf.net/sfu/sprint-com-first
_______________________________________________
The Open Source Thin Client Solution http://openthinclient.org
openthinclient-user@lists.sourceforge.net
https://lists.sourceforge.net/lists/listinfo/openthinclient-user

Reply via email to