One more note regarding open port requirements. With the previous port
settings described below, I was able to get to the login screen, but no
further. I subsequently had to unblock TCP 51797 to actually log in. So if
anyone on the dev team reads this, the prerequisites page should probably be
updated (for Windows 2008R2 at least) to include these additional ports.
--
Greg Lara
IT Director
Columbia University Press
61 West 62nd Street, 3rd Floor
New York, NY 10023
212-459-0600, ext 7132
On Wed, Oct 26, 2011 at 6:11 PM, Greg Lara <gl2...@columbia.edu> wrote:
> Lee, thank you for your comment, it ultimately led me to my answers. It
> turns out the Windows firewall doesn't log blocked requests by default, but
> can be configured to do so. Once I enabled that, I was able to troubleshoot
> which port requests were being dropped.
>
> I had to unblock the following ports in order to successfully boot my
> client:
>
> TCP/UDP 111
> TCP 62189
>
>
> In addition, I had to make sure the scope for the UDP/67 rule included all
> computers--I was originally only allowing access from my local IP range.
> This is because the port 67 request is a broadcast (
> 0.0.0.0/255.255.255.255), which was outside of my local scope.
>
>
> Once again, the community saves the day. Thanks.
>
> --
>
> Greg Lara
> IT Director
> Columbia University Press
> 61 West 62nd Street, 3rd Floor
> New York, NY 10023
> 212-459-0600, ext 7132
>
>
> On Wed, Oct 26, 2011 at 5:02 PM, Lee Allen <l...@leecallen.com> wrote:
>
>> Does your firewall report blocked connections, or can it be configured to
>> do so? If so, examine the log for the time period in question.
>>
>> Lee
>>
>> On Wed, Oct 26, 2011 at 4:10 PM, Greg Lara <gl2...@columbia.edu> wrote:
>>
>>> Thanks Alexander. I ran the advisor and even with the firewall on, all
>>> ports seemed to connect successfully, so I guess I'm back to square one.
>>> Turning off the firewall isn't really an option, and I'm not sure how else
>>> to determine what is being blocked, short of employing a packet analyzer, an
>>> option I don't really have time for. Any further thoughts or suggestions
>>> would be appreciated.
>>>
>>>
>>>
------------------------------------------------------------------------------
The demand for IT networking professionals continues to grow, and the
demand for specialized networking skills is growing even more rapidly.
Take a complimentary Learning@Cisco Self-Assessment and learn
about Cisco certifications, training, and career opportunities.
http://p.sf.net/sfu/cisco-dev2dev
_______________________________________________
The Open Source Thin Client Solution http://openthinclient.org
openthinclient-user@lists.sourceforge.net
https://lists.sourceforge.net/lists/listinfo/openthinclient-user
