On a whim I changed /etc/apt/sources.list to what I use for my other deb boxes
deb http://ftp.us.debian.org/debian/ squeeze main deb-src http://ftp.us.debian.org/debian/ squeeze main deb http://security.debian.org/ squeeze/updates main deb-src http://security.debian.org/ squeeze/updates main deb http://ftp.us.debian.org/debian/ squeeze-updates main contrib non-free deb-src http://ftp.us.debian.org/debian/ squeeze-updates main contrib non-free Essentially removing the local files in /root and did a apt-get dist-upgrade and everything updated and is working fine now.. Thanks, Jason > -----Original Message----- > From: Openvas-discuss [mailto:openvas-discuss- > [email protected]] On Behalf Of Weir, Jason > Sent: Thursday, March 07, 2013 4:15 PM > To: [email protected]; [email protected] > Subject: Re: [Openvas-discuss] Demo fails to work after dist-upgrade > > I've somewhat started over - I have the unmodified demo vm running, > working as it should > > Apt thinks I've got 0.9.19-1 installed... > > #apt-cache policy libmicrohttpd10 > libmicrohttpd10: > Installed: 0.9.19-1 > Candidate: 0.9.19-1 > Version table: > *** 0.9.19-1 0 > 100 /var/lib/dpkg/status > > There is a version in /root (0.9.15) > > #ls /root/libmicrohttpd > libmicrohttpd-0.9.15 libmicrohttpd-0.9.15.tar.gz > > So which one is being used? > > Next libmicrohttpd was not among the packages updated when I ran apt-get > dist-upgrade (see list in the OP) - so it seems that I'm not having a > libmicrohttpd problem.. Same version installed before and after per > apt. > > Can't uninstall the 0.9.19 version as greenbone-security-assistant is > dependent on it.. > > Installing (./configure && make && make install) the version in /root > had no effect.. > > Seems like a great tool and I really like the interface but if I can't > get it to run and stay updated on Debian then it's useless... > > Any ideas? > > Jason > > > -----Original Message----- > > From: Geoff Galitz [mailto:[email protected]] > > Sent: Thursday, March 07, 2013 12:25 PM > > To: Weir, Jason > > Cc: [email protected]; [email protected] > > Subject: RE: [Openvas-discuss] Demo fails to work after dist-upgrade > > > > FWIW, I found that deb management of that package might be a little > > whacky > > on the demo vm. I looked at my own install and saw that I manually > > downgraded to /usr/lib/libmicrohttpd.so.10.13.0 from > > /usr/lib/libmicrohttpd.so.10.14.0 > > > > There might be a libmicrohttpd package in your /root already with the > > working version. I have one on all of my demo vm copies but I don't > > recall if I downloaded it myself or not. > > > > I cannot guarantee that is the issue for you, but I know I ran into > that > > after an upgrade. > > > > -G > > > > > Ok - I went back and checked the snapshot before the upgrade and had > > > libmicrohttpd10 v0.9.19-1 installed then as well. > > > > > > So it was not upgraded, what to check next?? > > > > > > -J > > > > > >> -----Original Message----- > > >> From: Openvas-discuss [mailto:openvas-discuss- > > >> [email protected]] On Behalf Of Weir, Jason > > >> Sent: Thursday, March 07, 2013 11:55 AM > > >> To: [email protected] > > >> Cc: [email protected] > > >> Subject: Re: [Openvas-discuss] Demo fails to work after > dist-upgrade > > >> > > >> Thanks Geoff - looks like I have libmicrohttpd10 v0.9.19-1 > installed, > > >> any idea what version works with OpenVAS? > > >> > > >> -J > > >> > > >> > -----Original Message----- > > >> > From: Geoff Galitz [mailto:[email protected]] > > >> > Sent: Thursday, March 07, 2013 11:46 AM > > >> > To: Weir, Jason > > >> > Cc: [email protected] > > >> > Subject: Re: [Openvas-discuss] Demo fails to work after > dist-upgrade > > >> > > > >> > Hi. > > >> > > > >> > Your libmicrohttpd most likely got upgraded (and the newer ones > are > > >> busted > > >> > with OpenVAS). I also use the demo VM as an appliance and ran > into > > >> the > > >> > same situation. The older libmircohttpd libs are probably still > > >> there, > > >> > just downgrade to those and you should be ok again. > > >> > > > >> > -G > > >> > > > >> > > Didn't see anything in the archives so thought I'd ask here > > >> > > > > >> > > I just installed the demo > > >> > > (http://www.e-cvi.net/openvas/OpenVAS-5-DEMO-1.0.ova) on ESXi > > 5.1. > > >> > > > > >> > > Kind of a PITA to get running I had to manually import the vmdk > > > file > > >> and > > >> > > extend it via the cli and then use gparted to extend /dev/sda > as > > > it > > >> had > > >> > > very little free space out of the box. > > >> > > > > >> > > Anyways it's up and working just fine, I've run a bunch of > scans > > >> without > > >> > > issue. > > >> > > > > >> > > Now when I do an apt-get update && apt-get dist-upgrade it > > > upgrades > > >> the > > >> > > following packages. > > >> > > > > >> > > The following packages will be upgraded: > > >> > > acpid automake base-files bind9-host dbus > debian-archive-keyring > > >> > > devscripts dnsutils dpkg dpkg-dev exim4 exim4-base exim4-config > > >> > > exim4-daemon-light file ghostscript gnupg gpgv gzip host > > >> initscripts > > >> > > isc-dhcp-client isc-dhcp-common krb5-multidev libbind9-60 > > >> > > libc-bin libc-dev-bin libc6 libc6-dev libc6-i686 libcups2 > > >> > > libcupsimage2 libdbus-1-3 libdns69 libdpkg-perl libexpat1 > libgc1c2 > > >> > > libgs8 libgssapi-krb5-2 libgssrpc4 libisc62 libisccc60 > > > libisccfg62 > > >> > > libk5crypto3 libkadm5clnt-mit7 libkadm5srv-mit7 libkdb5-4 > > >> > > libkrb5-3 libkrb5-dev libkrb5support0 libldap-2.4-2 > libldap2-dev > > >> > > liblwres60 libmagic1 libmysqlclient16 libnss3-1d libopenjpeg2 > > >> > > libpoppler5 libssh-4 libssh-dev libssl-dev libssl0.9.8 > libtiff4 > > >> libxi6 > > >> > > libxml2 libxml2-dev libxslt1-dev libxslt1.1 linux-base > > >> > > linux-headers-2.6.32-5-686 linux-headers-2.6.32-5-common > > >> > > linux-image-2.6.32-5-686 linux-libc-dev locales mysql-common > > > openssl > > >> > > perl perl-base perl-modules poppler-utils procps python > > >> python-minimal > > >> > > sysv-rc sysvinit sysvinit-utils texlive-base > > >> > > texlive-common texlive-fonts-recommended texlive-fonts- > > >> > recommended-doc > > >> > > texlive-generic-recommended texlive-latex-base > > >> > > texlive-latex-base-doc texlive-latex-recommended > > >> > > texlive-latex-recommended-doc texlive-luatex texlive-metapost > > >> > > texlive-metapost-doc texlive-pictures texlive-pictures-doc > > > tzdata > > >> > > xsltproc > > >> > > 102 upgraded, 0 newly installed, 0 to remove and 0 not > upgraded. > > >> > > > > >> > > After the upgrade the web interface is no longer responding. > It > > >> churns > > >> > > and churns then times out.. > > >> > > > > >> > > Any ideas which package is causing the problem? Does something > > > need > > >> to > > >> > > be downgraded? > > >> > > > > >> > > Seeing this error in /var/log/openvas/openvasad.log > > >> > > > > >> > > lib auth:WARNING:2013-03-07 05h03.51 EST:1322: Authentication > > >> > > configuration could not be loaded. > > >> > > > > >> > > Thanks, > > >> > > Jason > > _______________________________________________ > Openvas-discuss mailing list > [email protected] > https://lists.wald.intevation.org/cgi-bin/mailman/listinfo/openvas-discu ss _______________________________________________ Openvas-discuss mailing list [email protected] https://lists.wald.intevation.org/cgi-bin/mailman/listinfo/openvas-discuss
