Hi, I have scanned the hosts and reports has been generated. Now in ETVAS8 when I export the pdf report it shows vulnerabilities and then list of systems with those vulnerability. In ETVAS 6 it was showing systems and then list of vulnerabilities detected on that system. Is it possible to export the report in same format as it was in ETVAS 6(Systems and list of vulnerabilities detected on that).
Thanks Deepak Jha From: Deepak Jha Sent: Saturday, April 11, 2015 7:12 PM To: Eero Volotinen Cc: [email protected] Subject: Re: [Openvas-discuss] installing openvas 8 from source on CentOS 7 Thanks it worked.My mistake I missed to run ldapconfig -f using conf file.After i did that i don't see any error when i run openvassd or other component. I really appreciate your help.Thanks again. ________________________________ From: [email protected]<mailto:[email protected]> <[email protected]<mailto:[email protected]>> on behalf of Eero Volotinen <[email protected]<mailto:[email protected]>> Sent: Saturday, April 11, 2015 6:56 PM To: Deepak Jha Cc: [email protected]<mailto:[email protected]> Subject: Re: [Openvas-discuss] installing openvas 8 from source on CentOS 7 I already told you to fix dynamic linker configuration to point openvas-libary directories and then run ldconfig and then you also need to set your $PATH to point your openvas bin and sbin directories. and then rest of information is available from google. Eero 2015-04-11 16:09 GMT+03:00 Deepak Jha <[email protected]<mailto:[email protected]>>: I downloaded and tried to run openvas-check-setup i got error message as below. [root@localhost downloads]# tail /tmp/openvas-check-setup.log Mode: server Date: Sat, 11 Apr 2015 09:07:10 -0400 Checking for old OpenVAS Scanner <= 2.0 ... ./openvas-check-setup: line 163: openvasd: command not found Checking presence of OpenVAS Scanner ... openvassd: error while loading shared libraries: libopenvas_nasl.so.8: cannot open shared object file: No such file or directory ERROR: No OpenVAS Scanner (openvassd) found. FIX: Please install OpenVAS Scanner. Thanks Deepak jha ________________________________ From: [email protected]<mailto:[email protected]> <[email protected]<mailto:[email protected]>> on behalf of Eero Volotinen <[email protected]<mailto:[email protected]>> Sent: Saturday, April 11, 2015 6:27 PM To: Deepak Jha Cc: [email protected]<mailto:[email protected]> Subject: Re: [Openvas-discuss] installing openvas 8 from source on CentOS 7 Well, download https://svn.wald.intevation.org/svn/openvas/trunk/tools/openvas-check-setup and run it with parameter --server rest of information is available on documentation at openvas.org<http://openvas.org>. Read it! -- Eero 2015-04-11 15:46 GMT+03:00 Deepak Jha <[email protected]<mailto:[email protected]>>: Thanks, That worked.Now i have compiled and installed all openvas packages. Now is there initial configuration i need to do? for example creating cert ,starting services , accessing GSA web console etc. ________________________________ From: [email protected]<mailto:[email protected]> <[email protected]<mailto:[email protected]>> on behalf of Eero Volotinen <[email protected]<mailto:[email protected]>> Sent: Saturday, April 11, 2015 4:34 PM To: Deepak Jha Cc: [email protected]<mailto:[email protected]> Subject: Re: [Openvas-discuss] installing openvas 8 from source on CentOS 7 Well. cmake is not finding your openvas libraries or openvas libraries are not installed. try following echo "/path-to-openvas/library" > /etc/ld.so.conf.d/openvas and running ldconfig after that and also try running following command before compiling export PKG_CONFIG_PATH=/your/location/openvas-lib/pkgconfig:$PKG_CONFIG_PATH works for me. Eero 2015-04-11 13:58 GMT+03:00 Deepak Jha <[email protected]<mailto:[email protected]>>: Hi, I have compiled and installed openvas-smb and openvas-library package. Now i am trying to compile openvas-scanner package.When i am running cmake .. i get below error.How to fix this? /root/downloads/openvas-scanner-5.0.1/build [root@localhost build]# cmake .. -- Configuring the Scanner... -- Install prefix: /usr/local -- checking for module 'libopenvas_nasl>=8.0.0' -- package 'libopenvas_nasl>=8.0.0' not found CMake Error at /usr/share/cmake/Modules/FindPkgConfig.cmake:279 (message): A required package was not found Call Stack (most recent call first): /usr/share/cmake/Modules/FindPkgConfig.cmake:333 (_pkg_check_modules_internal) CMakeLists.txt:187 (pkg_check_modules) -- checking for module 'libopenvas_base>=8.0.0' -- package 'libopenvas_base>=8.0.0' not found CMake Error at /usr/share/cmake/Modules/FindPkgConfig.cmake:279 (message): A required package was not found Call Stack (most recent call first): /usr/share/cmake/Modules/FindPkgConfig.cmake:333 (_pkg_check_modules_internal) CMakeLists.txt:188 (pkg_check_modules) -- checking for module 'libopenvas_misc>=8.0.0' -- package 'libopenvas_misc>=8.0.0' not found CMake Error at /usr/share/cmake/Modules/FindPkgConfig.cmake:279 (message): A required package was not found Call Stack (most recent call first): /usr/share/cmake/Modules/FindPkgConfig.cmake:333 (_pkg_check_modules_internal) CMakeLists.txt:189 (pkg_check_modules) -- checking for module 'libopenvas_omp>=8.0.0' -- package 'libopenvas_omp>=8.0.0' not found CMake Error at /usr/share/cmake/Modules/FindPkgConfig.cmake:279 (message): A required package was not found Call Stack (most recent call first): /usr/share/cmake/Modules/FindPkgConfig.cmake:333 (_pkg_check_modules_internal) CMakeLists.txt:190 (pkg_check_modules) -- Looking for libgcrypt... -- Looking for libgcrypt... /usr/lib64/libgcrypt.so -- Configuring incomplete, errors occurred! [root@localhost build]# Thanks, Deepak Jha ________________________________ From: Deepak Jha Sent: Saturday, April 11, 2015 3:48 PM To: Eero Volotinen Cc: [email protected]<mailto:[email protected]> Subject: Re: [Openvas-discuss] installing openvas 8 from source on CentOS 7 Thank you, this fix worked. ________________________________ From: [email protected]<mailto:[email protected]> <[email protected]<mailto:[email protected]>> on behalf of Eero Volotinen <[email protected]<mailto:[email protected]>> Sent: Saturday, April 11, 2015 2:55 PM To: Deepak Jha Cc: [email protected]<mailto:[email protected]> Subject: Re: [Openvas-discuss] installing openvas 8 from source on CentOS 7 Hi, Sorry, this was my mistake on first patch testing. apply patch: http://ping-viini.org/heimdal-epel.patch on openvas-smb-1.0.1 directory and then try again with rm -fr build mkdir build cd build cmake .. && make && make install does it work now? Eero 2015-04-11 12:20 GMT+03:00 Deepak Jha <[email protected]<mailto:[email protected]>>: Hi, Thanks for your help. I have successfully compiled and installed openvas-smb. I am trying to install openvas-library. cmake.. command successfully completed.Now i am trying to run make command.it<http://command.it> completes till 99% and then gives error as below. Linking C static library libsamba-static.a [ 93%] Built target samba-static [ 93%] Built target bin2c Linking C shared library libopenvas_wincmd.so [ 95%] Built target openvas_wincmd Linking C executable winexe /usr/bin/ld: ../samba/libsamba-static.a(credentials_krb5.c.o): undefined reference to symbol 'gss_krb5_import_cred@@gssapi_krb5_2_MIT' /usr/bin/ld: note: 'gss_krb5_import_cred@@gssapi_krb5_2_MIT' is defined in DSO /lib64/libgssapi_krb5.so.2 so try adding it to the linker command line /lib64/libgssapi_krb5.so.2: could not read symbols: Invalid operation collect2: error: ld returned 1 exit status make[2]: *** [winexe/winexe] Error 1 make[1]: *** [winexe/CMakeFiles/winexe.dir/all] Error 2 make: *** [all] Error 2 please let me know how can i fix this issue. Regards, Deepak jha ________________________________ From: [email protected]<mailto:[email protected]> <[email protected]<mailto:[email protected]>> on behalf of Eero Volotinen <[email protected]<mailto:[email protected]>> Sent: Friday, April 10, 2015 7:37 PM To: Deepak Jha Cc: [email protected]<mailto:[email protected]> Subject: Re: [Openvas-discuss] installing openvas 8 from source on CentOS 7 2015-04-10 17:04 GMT+03:00 Deepak Jha <[email protected]<mailto:[email protected]>>: Hi, I am trying to compile openvas-library but getting below error. cmake .. -- Configuring the Libraries... -- Install prefix: /usr/local -- checking for module 'libopenvas_wmiclient>=0.0.1' -- package 'libopenvas_wmiclient>=0.0.1' not found -- checking for module 'libopenvas_wincmd>=0.0.1' -- package 'libopenvas_wincmd>=0.0.1' not found -- Looking for pcap... -- Looking for pcap... /usr/lib64/libpcap.so -- Looking for pcap-config... -- Looking for pcap-config... /usr/bin/pcap-config -- Looking for gpgme... -- Looking for gpgme... /usr/lib64/libgpgme.so -- Looking for ksba... -- Looking for ksba... /usr/lib64/libksba.so -- Looking for netsnmp... -- Looking for netsnmp... SNMP-NOTFOUND -- Looking for libgcrypt... -- Looking for libgcrypt... /usr/lib64/libgcrypt.so -- checking for module 'uuid' -- package 'uuid' not found CMake Error at /usr/share/cmake/Modules/FindPkgConfig.cmake:279 (message): A required package was not found Call Stack (most recent call first): /usr/share/cmake/Modules/FindPkgConfig.cmake:333 (_pkg_check_modules_internal) misc/CMakeLists.txt:45 (pkg_check_modules) You need to install uuid development package. I think then name of package is uuid-devel in centos / rhel (yum install -y uuid-devel) -- Eero
_______________________________________________ Openvas-discuss mailing list [email protected] https://lists.wald.intevation.org/cgi-bin/mailman/listinfo/openvas-discuss
