2016-12-29 10:23 GMT+05:00 Selva Nair <selva.n...@gmail.com>:
> Hi,
>
> On Wed, Dec 28, 2016 at 11:56 PM, Илья Шипицин <chipits...@gmail.com>
> wrote:
>
>>
>> I seem to see several times issues like described in #665
>>
>
> I have seen this in the past but, iirc, without the FlushipNetTable error,
> though not 100% sure of that.
>
> However,
>
>
>>
>> what seems to be strange is couple of things:
>>
>> 1) "OR" clause. why not "AND" ? https://github.com/OpenVPN/ope
>> nvpn/blob/master/src/openvpn/tun.c#L6012-L6013
>>
>
> OR is correct as either case (error in WriteFile or error in ReadFile) is
> a failure.
>
>
>>
>>
>> 2) error message seems to be irrelevant https://github.com/OpenVPN/ope
>> nvpn/blob/master/src/openvpn/tun.c#L6034
>>
>
> I think this results from failure to set the IP using DHCP and always
> thought it to be some misbehavior in the tap driver. But the failure to
> flush may be related...
>
> Have you found a way to reproduce it consistently?
>
I only seen that on Win10 (as described in trac ticket). So, I'll make
win10 virtual appliance and will try to consistently reproduce it myself.
>
> Selva
>
>
------------------------------------------------------------------------------
Check out the vibrant tech community on one of the world's most
engaging tech sites, SlashDot.org! http://sdm.link/slashdot
_______________________________________________
Openvpn-devel mailing list
Openvpn-devel@lists.sourceforge.net
https://lists.sourceforge.net/lists/listinfo/openvpn-devel
