The family specific options were generally omitted.
Signed-off-by: Frank Lichtenheld <[email protected]>
---
doc/man-sections/client-options.rst | 5 +++++
doc/man-sections/link-options.rst | 5 ++++-
src/openvpn/options.c | 17 +++++++++--------
3 files changed, 18 insertions(+), 9 deletions(-)
v2: move #define around
diff --git a/doc/man-sections/client-options.rst
b/doc/man-sections/client-options.rst
index 73f1ea51..4c4a8707 100644
--- a/doc/man-sections/client-options.rst
+++ b/doc/man-sections/client-options.rst
@@ -198,6 +198,11 @@ configuration.
When iterating through connection profiles, only consider profiles using
protocol ``p`` (:code:`tcp` \| :code:`udp`).
+ Note that this specifically only affects the protocol, not the inet
+ family (i.e. IPv4 vs. IPv6). While the option actually accepts
+ values like :code:`udp6`, there is no difference to specifying
+ :code:`udp`.
+
--pull
This option must be used on a client which is connecting to a
multi-client server. It indicates to OpenVPN that it should accept
diff --git a/doc/man-sections/link-options.rst
b/doc/man-sections/link-options.rst
index cbc1e97b..0457727e 100644
--- a/doc/man-sections/link-options.rst
+++ b/doc/man-sections/link-options.rst
@@ -276,7 +276,10 @@ the local and the remote host.
--proto p
Use protocol ``p`` for communicating with remote host. ``p`` can be
- :code:`udp`, :code:`tcp-client`, or :code:`tcp-server`.
+ :code:`udp`, :code:`tcp-client`, or :code:`tcp-server`. You can also
+ limit OpenVPN to use only IPv4 or only IPv6 by specifying ``p`` as
+ :code:`udp4`, :code:`tcp4-client`, :code:`tcp4-server` or :code:`udp6`,
+ :code:`tcp6-client`, :code:`tcp6-server`, respectively.
The default protocol is :code:`udp` when ``--proto`` is not specified.
diff --git a/src/openvpn/options.c b/src/openvpn/options.c
index 1176a7c8..e7eba341 100644
--- a/src/openvpn/options.c
+++ b/src/openvpn/options.c
@@ -126,9 +126,11 @@ static const char usage_message[] =
"--remote-random-hostname : Add a random string to remote DNS name.\n"
"--mode m : Major mode, m = 'p2p' (default, point-to-point) or
'server'.\n"
"--proto p : Use protocol p for communicating with peer.\n"
- " p = udp (default), tcp-server, or tcp-client\n"
+ " p = udp (default), tcp-server, tcp-client\n"
+ " udp4, tcp4-server, tcp4-client\n"
+ " udp6, tcp6-server, tcp6-client\n"
"--proto-force p : only consider protocol p in list of connection
profiles.\n"
- " p = udp6, tcp6-server, or tcp6-client (ipv6)\n"
+ " p = udp or tcp\n"
"--connect-retry n [m] : For client, number of seconds to wait between\n"
" connection retries (default=%d). On repeated retries\n"
" the wait time is exponentially increased to a maximum
of m\n"
@@ -2298,6 +2300,8 @@ options_postprocess_verify_ce(const struct options
*options,
*/
if (options->mode == MODE_SERVER)
{
+#define USAGE_VALID_SERVER_PROTOS "--mode server currently only supports " \
+ "--proto values of udp, tcp-server, tcp4-server, or tcp6-server"
#ifdef TARGET_ANDROID
msg(M_FATAL, "--mode server not supported on Android");
#endif
@@ -2315,15 +2319,14 @@ options_postprocess_verify_ce(const struct options
*options,
}
if (!(proto_is_udp(ce->proto) || ce->proto == PROTO_TCP_SERVER))
{
- msg(M_USAGE, "--mode server currently only supports "
- "--proto udp or --proto tcp-server or proto tcp6-server");
+ msg(M_USAGE, USAGE_VALID_SERVER_PROTOS);
}
#if PORT_SHARE
if ((options->port_share_host || options->port_share_port)
&& (ce->proto != PROTO_TCP_SERVER))
{
msg(M_USAGE, "--port-share only works in TCP server mode "
- "(--proto tcp-server or tcp6-server)");
+ "(--proto values of tcp-server, tcp4-server, or tcp6-server)");
}
#endif
if (!options->tls_server)
@@ -2367,9 +2370,7 @@ options_postprocess_verify_ce(const struct options
*options,
}
if (!(proto_is_dgram(ce->proto) || ce->proto == PROTO_TCP_SERVER))
{
- msg(M_USAGE,
- "--mode server currently only supports --proto udp or --proto "
- "tcp-server or --proto tcp6-server");
+ msg(M_USAGE, USAGE_VALID_SERVER_PROTOS);
}
if (!proto_is_udp(ce->proto) && (options->cf_max || options->cf_per))
{
--
2.30.2
_______________________________________________
Openvpn-devel mailing list
[email protected]
https://lists.sourceforge.net/lists/listinfo/openvpn-devel
