Hi,
On 07/04/16 07:14, Samuel Seidel wrote:
I believe I took this a bit further than I needed.
Right now I have two public IP's on a VPS. I have a single openvpn
client that I wish to connect. I want this client to get the secondary IP.
in that case I'd use a CCD file for that single client, assign a private
address (from the 'regular' pool of VPN IPs) and use iptables to NAT the
private address for that VPN client to the secondary public IP.
HTH,
JJK
On Thu, Feb 25, 2016 at 3:49 AM, Jan Just Keijser <[email protected]
<mailto:[email protected]>> wrote:
Samuel Seidel wrote:
I have purchased OpenVPN 2 Cookbook, was only able to find
information to do this if you had access to a block of IP's.
Mine our non-contiguous.
handing out non-contiguous IPs is definitely possible, but you are
right in the sense that no info is given in the book on this - it
depends too much on your particular situation.
Let's say you have N clients and X public IPs.
If N <= X then you can assign IPs to each client and hand them out
using a client-connect script (or using a custom
--ifconfig-pool-persist file)
if N > X then you must rotate the assignment of public IPs. This
is doable using a client-connect + client-disconnect script. I'd
abuse a directory as a poor-man's database in this case:
1) list all public IPs as zer0-length files, i.e.
IP1
IP2
IP3
etc
2) whenever a client connects, check if an IP was already assigned
by looking for a file "<client-name>-IPn" ; if found, return the IP
3) if not found, the search for an available public IP and rename
that file to <client-name>-IPn
4) on disconnect, rename the file "<client-name>-IPn" back to IPn
Also, make sure to use --explicit-exit-notify to ensure that
clients signal a disconnect in time. This can be pushed from the
server using
push "explicit-exit-notify 3"
It'll take some hacking to get it right, but the above idea should
definitely work .
HTH,
JJK
On Wed, Feb 17, 2016 at 4:52 AM, Jan Just Keijser
<[email protected] <mailto:[email protected]>
<mailto:[email protected] <mailto:[email protected]>>> wrote:
Hi Samuel,
Samuel Seidel wrote:
A: Server - A server with non-contiguous IP's, which
each may
have separate gateways, from any substandard vps
hosting provider
Two static public IP addresses, for example: 203.0.113.101
203.0.114.202
B: Client - Pfsense and/or Openwrt, has a dynamic IP,
for example:
203.0.115.1
Premise: A person wants to host a web server, and some
other
services, through a home router (B). He wishes to
benefit from
having a dedicated, non-changing, IP from which people can
access his servers from, and he also wishes to benefit
from
having a better backbone connection, then his Comcast
connection can provide, and additionally the benefit of
compression.
How can he assign one of the IP's from Server A, to a
client,
like a router for example, or maybe just a windows
computer?
How can one accomplish this using openvpn?
My Goal:
My goal today is to be able to setup an openvpn server
and for
a device to then connect and then be IPv4 publicly
accessible
from the internet. I know I could accomplish this by
handing
out a private address and 1:1 natting a public IP to
it with
IPTables, but the goal is to make it transparent to
the host,
and allow for applications to bind directly to the IP
without
throwing errors.
------------------------------------------------------------------------
this is explained in detail in both my OpenVPN 2 Cookbook
and the
book "Mastering OpenVPN". It is perfectly possible to do
this in
both TUN and TAP mode.
HTH,
JJK
Hints: "topology subnet" + use proxy arp
------------------------------------------------------------------------------
_______________________________________________
Openvpn-users mailing list
[email protected]
https://lists.sourceforge.net/lists/listinfo/openvpn-users