On Thu, Apr 07, 2016 at 01:14:37AM -0400, Samuel Seidel wrote:
> I believe I took this a bit further than I needed.
> 
> Right now I have two public IP's on a VPS. I have a single
> openvpn client that I wish to connect. I want this client to
> get the secondary IP.

This looks like a case for old-fashioned p2p mode:

[static peer, "server"]
# your primary VPS IP here
local primary.vps.ip.addr
# don't set remote
float
# file generated by "openvpn --genkey --file /path/to/shared/key"
# DO THAT ON A PHYSICAL MACHINE, not on the VPS
secret "/path/to/shared/key"
# first address is just any old unused RFC 1918 address
# second address is your secondary IP
ifconfig 172.28.28.28 secondary.vps.ip.addr
... (other settings as needed/desired)

[dynamic peer, "client"]
# don't set "local"
remote primary.vps.ip.addr
secret "/path/to/shared/key"
# first address is your secondary IP
# second address is that RFC 1918 address from above
ifconfig secondary.vps.ip.addr 172.28.28.28
... (other settings as needed/desired)

Do NOT bind the secondary IP on the VPS
DO enable proxy ARP

This is not a complete example; you can fill it in from JJK's book.

Yes, you can do the NAT as JJK suggested, but ugh, NAT is bad.
-- 
  http://rob0.nodns4.us/
  Offlist GMX mail is seen only if "/dev/rob0" is in the Subject:

------------------------------------------------------------------------------
_______________________________________________
Openvpn-users mailing list
[email protected]
https://lists.sourceforge.net/lists/listinfo/openvpn-users

Reply via email to