Thank you all.
I will do further testing/troubleshooting .
Best regards
On Thu, Oct 12, 2017 at 9:59 AM, Xen <l...@xenhideout.nl> wrote:
> Aziz schreef op 12-10-2017 10:32:
>
> Hi All,
>>
>> I'm using OpenVPN server behind NAT (Firewall), I need to know which
>> ports to open in order to allow clients to connect to my OVPN server. In
>> other words what are the defaults ports used by an OVPN server ?
>>
>
> That means the only port you need is 1194, either tcp or udp.
>
> The management port is generally 1195 if configured. But this would then
> only be available to you inside the network, or inside the host.
>
> You can test on your server, if it is configured with:
>
> telnet localhost 1195.
>
> If it connects, you then have commands like:
>
> status -- to show the list of connected clients
> kill <common name> -- to kick a client.
>
>
>
> But that is not something you need to forward, so there is really only one
> port, like Antonio mentioned.
>
> ------------------------------------------------------------
> ------------------
> Check out the vibrant tech community on one of the world's most
> engaging tech sites, Slashdot.org! http://sdm.link/slashdot
> _______________________________________________
> Openvpn-users mailing list
> Openvpn-users@lists.sourceforge.net
> https://lists.sourceforge.net/lists/listinfo/openvpn-users
>
------------------------------------------------------------------------------
Check out the vibrant tech community on one of the world's most
engaging tech sites, Slashdot.org! http://sdm.link/slashdot
_______________________________________________
Openvpn-users mailing list
Openvpn-users@lists.sourceforge.net
https://lists.sourceforge.net/lists/listinfo/openvpn-users
