thanks a lots Il giorno martedì 7 febbraio 2017 16:33:09 UTC+1, Federico Capoano ha scritto: > > We don't think what you want to do is possible. > > You mainly have 3 possibilities: > > - use a layer2 VPN to tunnel your users through a single captive portal > - setup a captive portal for each layer 2 network you have, each captive > portal can talk to a central RADIUS server > - include a lightweight captive portal (like coova) in every OpenWRT/LEDE > access point, each captive portal can talk to a central RADIUS server > > Federico > > On Tuesday, February 7, 2017 at 4:17:23 PM UTC+1, Alessandro Masotti wrote: >> >> yes, are differt buildings (hotel/resort) >> >> Il giorno martedì 7 febbraio 2017 15:38:33 UTC+1, Federico Capoano ha >> scritto: >>> >>> Coova can be installed either on OpenWRT or debian, ubuntu, ecc. >>> >>> PfSense zones have to be assigned to a specific interface, so you would >>> have to create a different interface, my colleagues suggest a different >>> vlan for each group. >>> >>> For 18 facilities you mean 18 different buldings? Are these on the same >>> layer 2 network? >>> >>> Federico >>> >>> >>> >>> On Tuesday, February 7, 2017 at 3:22:51 PM UTC+1, Alessandro Masotti >>> wrote: >>>> >>>> Yes I want to avoid VPN. >>>> >>>> you say to install coova on server or on AP? >>>> >>>> Il giorno martedì 7 febbraio 2017 09:55:41 UTC+1, Federico Capoano ha >>>> scritto: >>>>> >>>>> On Tuesday, February 7, 2017 at 9:34:28 AM UTC+1, Alessandro Masotti >>>>> wrote: >>>>>> >>>>>> Yes, but in many structures in different places how i can do that? >>>>>> I can bring al the structures with VPN but the connection slow down. >>>>>> It's possible to mix OW2 + Pfsense to create this combination without >>>>>> slow down the connection? >>>>>> >>>>> >>>>> So you want to use Pfsense on site to avoid the VPN, right? >>>>> >>>>> OpenWISP2 cannot automatically manage PfSense yet. We'd like to add a >>>>> configuration backend for it but we have not funding to do that right now. >>>>> You can install and manage PfSense manually. >>>>> >>>>> Otherwise you can use coova on OpenWRT. >>>>> >>>>> Federico >>>>> >>>>
-- You received this message because you are subscribed to the Google Groups "OpenWISP" group. To unsubscribe from this group and stop receiving emails from it, send an email to [email protected]. For more options, visit https://groups.google.com/d/optout.
