TL-841N has 4MB flash...not 1MB If you cant build the image file, its because of another reason.... probably because the resulting image will be bigger than 4MB.... try removing the luci (gui) from the build (if it's not already removed)
On Wednesday, April 12, 2017 at 8:20:34 AM UTC+3, Nguyễn Vinh wrote: > > Hi Fed, > ====== > i try build lede with openwisp-config-nossl -> success, but my deivce > can't register device, > follow link: > https://github.com/openwisp/openwisp-config/blob/master/README.rst#compiling-a-custom-lede-openwrt-image > and then i rebuild with openwisp-config-mbedtls - 0.4.5-1, them same with > error. > ======================log on device======================== > logread -f: > Wed Apr 12 03:22:33 2017 daemon.info openwisp: Registering device... > Wed Apr 12 03:22:33 2017 daemon.err openwisp: Failed to connect to > controller during registration: curl exit code 48 > > ==================================================================================== > and my question: > My device is TL-WR841 V11, it've 1M flash, is it enough flash memory to > install openwisp-config-ssl ?because, lede do'nt generate bin file, when i > build firmware. > https://wikidevi.com/wiki/TP-LINK_TL-WR841N_v11.x > -- You received this message because you are subscribed to the Google Groups "OpenWISP" group. To unsubscribe from this group and stop receiving emails from it, send an email to [email protected]. For more options, visit https://groups.google.com/d/optout.
