Federico, I will manually do the balancing, so I understood the URL after being registered in the AP and in OpenWisp, can not be changed any more? would have some file in the system that can be changed so that it is possible to register the same AP again, but in another OpenWisp? or just resetting the AP and setting everything up again?
Thank you for your help. Att, Mateus. Em quarta-feira, 7 de novembro de 2018 18:30:12 UTC-2, Federico Capoano escreveu: > > Hi Mateus, > > I remember you asked this before, some time ago we discussed the > possibility of allowing the agent to have multiple URLs set > <https://groups.google.com/d/msg/openwisp/XqzEMamhumY/bC2QaeVLAAAJ>. > > Arthur wrote some draft code but > <https://github.com/openwisp/openwisp-config/pull/49> we didn't go ahead > on it, mainly because my lack of time and different priorities but if you > want to help out to test it / give feedback / improve it you're welcome to > do so. > > An alternative could be using anycast routing but I'm no expert with that > and I can't offer any suggestion on whether it's really feasible/doable and > how to do it. > > Federico > > > On Wednesday, November 7, 2018 at 3:34:03 PM UTC+1, [email protected] > wrote: >> >> >> Hello, I need help... I have the following structure: 1 PfSense 2 APs >> TP-LINK WA901ND - With LEDE. 2 OpenWisp controllers - One on the local >> network (192.168.10.10) and one on the cloud (Azure) (172.16.0.10) I closed >> a Site-to-Site IPSec VPN connection between Pfsense and Azure and the two >> networks communicate. But somehow I need to make redundancy in the APs, >> when the local controller is out, the cloud controller is in action, is >> there any way to do that for OpenWisp, or for LEDE? Thank you. >> > -- You received this message because you are subscribed to the Google Groups "OpenWISP" group. To unsubscribe from this group and stop receiving emails from it, send an email to [email protected]. For more options, visit https://groups.google.com/d/optout.
