Hi I'm new to OpenWISP and found it very useful. I'm building a test environment with few OpenWRT wireless Access points (BT Hub 5 Type A) and OpenWISP2
I have successfully deployed the OWISP2 on a Raspberry Pi using the Ansible module and have the OWISP2 up and working. I managed to installed the openwisp-config-openssl_0.4.6a-1_all.ipk <http://downloads.openwisp.io/openwisp-config/latest/openwisp-config-openssl_0.4.6a-1_all.ipk> on the OpenWRT device , did the configuration on the ini file to point to the OWISP2 server with correct Shared Key, SSL verify set to NO . The AP successfully registered to OWISP and I was able to create some basic templates for assigning the DNS. My aim is to create a template to manage the WiFi SSID , password. my OpenWRT devices already have (existing) : Radios: radio0 (5ghz) radio1 (2ghz) Interfaces : wlan0 : Default SSID for 5ghz radio0 wlan1 : Default SSID for 2ghz radio0 br-lan (LAN) : which is a bridge for all RJ45 ports and the wlan0 and wlan1 interfaces and has a static IP address for management WAN : Not Used ADSL: Not used I tried to create a Wireless Interface in OWISP2 template, tried calling it "wlan5" and assigned it to the network "LAN(br-lan)" but after the openwrt downloads and applies the configuration it loses its IP address and I think it somehow destrys the existing br-lan. in this situation, I can only revert to factory setting by pressing the reset button on the device. may I please seek help to understand what is the best way to create and manage SSIDs (wireless interfaces) with OWISP and such existing configuration on OpenWRT? Thanks Reza -- You received this message because you are subscribed to the Google Groups "OpenWISP" group. To unsubscribe from this group and stop receiving emails from it, send an email to [email protected]. To view this discussion on the web, visit https://groups.google.com/d/msgid/openwisp/29066432-08b6-409d-a127-ad97042ad0bd%40googlegroups.com.
