Hello Reza, I have not used OpenWISP with a real OpenWRT device only with a Virtual device. But have you tried entering the value of the IP address in the IP address field? I think that might be the problem. The default is from a DHCP server. If you don't have a DHCP server, then sending the default value will result to an empty IP address.
On Wed, Sep 4, 2019, 12:05 PM Reza Toghraee <[email protected]> wrote: > Hi > > I'm new to OpenWISP and found it very useful. I'm building a test > environment with few OpenWRT wireless Access points (BT Hub 5 Type A) and > OpenWISP2 > > I have successfully deployed the OWISP2 on a Raspberry Pi using the > Ansible module and have the OWISP2 up and working. > I managed to installed the openwisp-config-openssl_0.4.6a-1_all.ipk > <http://downloads.openwisp.io/openwisp-config/latest/openwisp-config-openssl_0.4.6a-1_all.ipk> > on > the OpenWRT device , did the configuration on the ini file to point to the > OWISP2 server with correct Shared Key, SSL verify set to NO . > The AP successfully registered to OWISP and I was able to create some > basic templates for assigning the DNS. > > My aim is to create a template to manage the WiFi SSID , password. > > my OpenWRT devices already have (existing) : > > Radios: > radio0 (5ghz) > radio1 (2ghz) > > Interfaces : > wlan0 : Default SSID for 5ghz radio0 > wlan1 : Default SSID for 2ghz radio0 > br-lan (LAN) : which is a bridge for all RJ45 ports and the wlan0 and > wlan1 interfaces and has a static IP address for management > WAN : Not Used > ADSL: Not used > > > I tried to create a Wireless Interface in OWISP2 template, tried calling > it "wlan5" and assigned it to the network "LAN(br-lan)" but after the > openwrt downloads and applies the configuration it loses its IP address and > I think it somehow destrys the existing br-lan. > in this situation, I can only revert to factory setting by pressing the > reset button on the device. > > may I please seek help to understand what is the best way to create and > manage SSIDs (wireless interfaces) with OWISP and such existing > configuration on OpenWRT? > > Thanks > Reza > > -- > You received this message because you are subscribed to the Google Groups > "OpenWISP" group. > To unsubscribe from this group and stop receiving emails from it, send an > email to [email protected]. > To view this discussion on the web, visit > https://groups.google.com/d/msgid/openwisp/29066432-08b6-409d-a127-ad97042ad0bd%40googlegroups.com > <https://groups.google.com/d/msgid/openwisp/29066432-08b6-409d-a127-ad97042ad0bd%40googlegroups.com?utm_medium=email&utm_source=footer> > . > On Sep 4, 2019 12:05 PM, "Reza Toghraee" <[email protected]> wrote: Hi I'm new to OpenWISP and found it very useful. I'm building a test environment with few OpenWRT wireless Access points (BT Hub 5 Type A) and OpenWISP2 I have successfully deployed the OWISP2 on a Raspberry Pi using the Ansible module and have the OWISP2 up and working. I managed to installed the openwisp-config-openssl_0.4.6a-1_all.ipk <http://downloads.openwisp.io/openwisp-config/latest/openwisp-config-openssl_0.4.6a-1_all.ipk> on the OpenWRT device , did the configuration on the ini file to point to the OWISP2 server with correct Shared Key, SSL verify set to NO . The AP successfully registered to OWISP and I was able to create some basic templates for assigning the DNS. My aim is to create a template to manage the WiFi SSID , password. my OpenWRT devices already have (existing) : Radios: radio0 (5ghz) radio1 (2ghz) Interfaces : wlan0 : Default SSID for 5ghz radio0 wlan1 : Default SSID for 2ghz radio0 br-lan (LAN) : which is a bridge for all RJ45 ports and the wlan0 and wlan1 interfaces and has a static IP address for management WAN : Not Used ADSL: Not used I tried to create a Wireless Interface in OWISP2 template, tried calling it "wlan5" and assigned it to the network "LAN(br-lan)" but after the openwrt downloads and applies the configuration it loses its IP address and I think it somehow destrys the existing br-lan. in this situation, I can only revert to factory setting by pressing the reset button on the device. may I please seek help to understand what is the best way to create and manage SSIDs (wireless interfaces) with OWISP and such existing configuration on OpenWRT? Thanks Reza -- You received this message because you are subscribed to the Google Groups "OpenWISP" group. To unsubscribe from this group and stop receiving emails from it, send an email to [email protected]. To view this discussion on the web, visit https://groups.google.com/d/msgid/openwisp/29066432-08b6-409d-a127-ad97042ad0bd%40googlegroups.com <https://groups.google.com/d/msgid/openwisp/29066432-08b6-409d-a127-ad97042ad0bd%40googlegroups.com?utm_medium=email&utm_source=footer> . -- You received this message because you are subscribed to the Google Groups "OpenWISP" group. To unsubscribe from this group and stop receiving emails from it, send an email to [email protected]. To view this discussion on the web, visit https://groups.google.com/d/msgid/openwisp/CAOwnGe5BKqwpy1KxLNW6kgT4-ctTjMDwiGOqzwFTw%2BqZwyyu3w%40mail.gmail.com.
