Sorry,
I made a mistake in the changed */etc/config/wireless*. The complete config
is as follows:
config wifi-device 'radio0'
option type 'mac80211'
option path 'pci0000:00/0000:00:00.0/0000:01:00.0'
option disabled '0'
option channel 'auto'
option country 'DE'
option htmode 'HT40'
option hwmode '11g'
option txpower '20'
config wifi-device 'radio1'
option type 'mac80211'
option path 'platform/10180000.wmac'
option disabled '0'
option channel 'auto'
option country 'DE'
option htmode 'VHT80'
option hwmode '11a'
option txpower '20'
config wifi-iface 'wifinet0'
option device 'radio0'
option network 'lan'
option mode 'ap'
option ssid 'X-WRT_1A63'
option encryption 'psk2'
option skip_inactivity_poll '1'
option wpa_group_rekey '0'
option wpa_pair_rekey '0'
option wpa_master_rekey '0'
option key '88888888'
config wifi-iface 'wifinet1'
option device 'radio1'
option network 'lan'
option mode 'ap'
option ssid 'X-WRT_1A63'
option encryption 'psk2'
option skip_inactivity_poll '1'
option wpa_group_rekey '0'
option wpa_pair_rekey '0'
option wpa_master_rekey '0'
option key '88888888'
config wifi-iface 'wifi_wlan0'
option device 'radio0'
option disabled '0'
option encryption 'psk2'
option hidden '0'
option ifname 'wlan0'
option isolate '0'
option key 'test1234'
option macfilter 'disable'
option mode 'ap'
option ssid 'Narouter'
option wds '0'
option wmm '1'
config wifi-iface 'wifi_wlan1'
option device 'radio1'
option disabled '0'
option encryption 'psk2'
option hidden '0'
option ifname 'wlan1'
option isolate '0'
option key 'test1234'
option macfilter 'disable'
option mode 'ap'
option ssid 'Narouter'
option wds '0'
option wmm '1'
On Saturday, August 1, 2020 at 12:35:11 AM UTC+2, Mirza Arnaut wrote:
>
> Hello Federico,
>
> When I boot it after running *firstboot* the following config is present:
>
> */etc/config/network*
> *config interface 'loopback'*
> * option ifname 'lo'*
> * option proto 'static'*
> * option ipaddr '127.0.0.1'*
> * option netmask '255.0.0.0'*
>
> *config globals 'globals'*
> * option ula_prefix 'fd00:a5a0:8fe0::/48'*
> * option packet_steering '1'*
>
> *config interface 'lan'*
> * option type 'bridge'*
> * option ifname 'eth0.1'*
> * option proto 'static'*
> * option ipaddr '192.168.15.1'*
> * option netmask '255.255.255.0'*
> * option ip6assign '60'*
>
> *config device 'lan_eth0_1_dev'*
> * option name 'eth0.1'*
> * option macaddr '7a:11:dc:1b:1a:63'*
>
> *config interface 'wan'*
> * option ifname 'eth0.2'*
> * option proto 'dhcp'*
>
> *config device 'wan_eth0_2_dev'*
> * option name 'eth0.2'*
> * option macaddr '78:11:dc:1b:1a:63'*
>
> *config interface 'wan6'*
> * option ifname 'eth0.2'*
> * option proto 'dhcpv6'*
>
> *config switch*
> * option name 'switch0'*
> * option reset '1'*
> * option enable_vlan '1'*
>
> *config switch_vlan*
> * option device 'switch0'*
> * option vlan '1'*
> * option ports '1 4 6t'*
>
> *config switch_vlan*
> * option device 'switch0'*
> * option vlan '2'*
> * option ports '0 6t'*
>
> *config interface 'usbwan'*
> * option proto 'dhcp'*
> * option ifname 'usb0'*
> * option metric '800'*
>
> */etc/config/wireless*
> *config wifi-device 'radio0'*
> * option type 'mac80211'*
> * option hwmode '11a'*
> * option path 'pci0000:00/0000:00:00.0/0000:01:00.0'*
> * option htmode 'VHT80'*
> * option disabled '0'*
> * option country 'CN'*
> * option txpower 'auto'*
> * option channel 'auto'*
>
> *config wifi-device 'radio1'*
> * option type 'mac80211'*
> * option hwmode '11g'*
> * option path 'platform/10180000.wmac'*
> * option htmode 'HT20'*
> * option disabled '0'*
> * option country 'CN'*
> * option txpower 'auto'*
> * option channel 'auto'*
>
> *config wifi-iface 'wifinet0'*
> * option device 'radio0'*
> * option network 'lan'*
> * option mode 'ap'*
> * option ssid 'X-WRT_1A63'*
> * option encryption 'psk2'*
> * option skip_inactivity_poll '1'*
> * option wpa_group_rekey '0'*
> * option wpa_pair_rekey '0'*
> * option wpa_master_rekey '0'*
> * option key '88888888'*
>
> *config wifi-iface 'wifinet1'*
> * option device 'radio1'*
> * option network 'lan'*
> * option mode 'ap'*
> * option ssid 'X-WRT_1A63'*
> * option encryption 'psk2'*
> * option skip_inactivity_poll '1'*
> * option wpa_group_rekey '0'*
> * option wpa_pair_rekey '0'*
> * option wpa_master_rekey '0'*
> * option key '88888888'*
>
> After installing openwisp and connecting it I get the following configs:
>
> */etc/config/network*
>
>
>
> *... (same as above)config interface 'wlan1' option auto '1'
> option enabled '1' option ifname 'wlan1' option mtu '1500'
> option proto 'none'config interface 'wlan0' option auto '1'
> option enabled '1' option ifname 'wlan0' option mtu '1500'
> option proto 'none'*
>
> */etc/config/wireless*
>
>
>
> *... (same as above)config wifi-iface 'wifi_wlan0' option device
> 'radio0' option disabled '0' option encryption 'psk2'
> option hidden '0' option ifname 'wlan0' option isolate '0'
> option key 'test1234' option macfilter 'disable' option
> mode 'ap' option ssid 'Narouter' option wds '0' option
> wmm '1'config wifi-iface 'wifi_wlan1' option device 'radio1'
> option disabled '0' option encryption 'psk2' option hidden
> '0' option ifname 'wlan1' option isolate '0' option
> key 'test1234' option macfilter 'disable' option mode 'ap'
> option ssid 'Narouter' option wds '0' option wmm '1'*
>
> The log after running *wifi* is:
> Sat Aug 1 00:28:05 2020 daemon.notice netifd: radio0 (12042): Command
> failed: Invalid argument
> Sat Aug 1 00:28:05 2020 daemon.notice netifd: radio1 (12043): Command
> failed: Invalid argument
> Sat Aug 1 00:28:05 2020 kern.info kernel: [ 418.779600] br-lan: port
> 2(wlan0) entered disabled state
> Sat Aug 1 00:28:05 2020 kern.info kernel: [ 418.796972] br-lan: port
> 3(wlan1) entered disabled state
> Sat Aug 1 00:28:05 2020 kern.info kernel: [ 418.820131] device wlan0
> left promiscuous mode
> Sat Aug 1 00:28:05 2020 kern.info kernel: [ 418.824690] br-lan: port
> 2(wlan0) entered disabled state
> Sat Aug 1 00:28:05 2020 kern.warn kernel: [ 418.830516]
> {natflow}:natflow_netdev_event(): catch NETDEV_UNREGISTER event for
> dev=wlan0
> Sat Aug 1 00:28:05 2020 kern.info kernel: [ 418.847009] device wlan1
> left promiscuous mode
> Sat Aug 1 00:28:05 2020 kern.info kernel: [ 418.851649] br-lan: port
> 3(wlan1) entered disabled state
> Sat Aug 1 00:28:05 2020 kern.warn kernel: [ 418.857420]
> {natflow}:natflow_netdev_event(): catch NETDEV_UNREGISTER event for
> dev=wlan1
> Sat Aug 1 00:28:07 2020 daemon.notice netifd: radio0 (12085): sh:
> acs_survey: out of range
> Sat Aug 1 00:28:07 2020 daemon.notice netifd: radio0 (12085): sh:
> acs_survey: out of range
> Sat Aug 1 00:28:08 2020 daemon.notice hostapd: Configuration file:
> /var/run/hostapd-phy0.conf (phy wlan0) --> new PHY
> Sat Aug 1 00:28:08 2020 kern.info kernel: [ 421.374436] IPv6:
> ADDRCONF(NETDEV_UP): wlan0: link is not ready
> Sat Aug 1 00:28:08 2020 kern.warn kernel: [ 421.380582] warning:
> (zone_netdev_event:346)dev=wlan0 set zone=127 type=0
> Sat Aug 1 00:28:08 2020 kern.warn kernel: [ 421.387524]
> {natflow}:natflow_netdev_event(): catch NETDEV_UP event for dev=wlan0, add
> ingress hook
> Sat Aug 1 00:28:08 2020 kern.info kernel: [ 421.475438] br-lan: port
> 2(wlan0) entered blocking state
> Sat Aug 1 00:28:08 2020 kern.info kernel: [ 421.480990] br-lan: port
> 2(wlan0) entered disabled state
> Sat Aug 1 00:28:08 2020 kern.info kernel: [ 421.486804] device wlan0
> entered promiscuous mode
> Sat Aug 1 00:28:08 2020 daemon.notice hostapd: ctrl_iface exists and
> seems to be in use - cannot override it
> Sat Aug 1 00:28:08 2020 daemon.notice hostapd: Delete
> '/var/run/hostapd/wlan0' manually if it is not used anymore
> Sat Aug 1 00:28:08 2020 daemon.err hostapd: Failed to setup control
> interface for wlan0
> Sat Aug 1 00:28:08 2020 daemon.err hostapd: wlan0: Unable to setup
> interface.
> Sat Aug 1 00:28:08 2020 daemon.notice hostapd: nl80211: deinit
> ifname=wlan0 disabled_11b_rates=0
> Sat Aug 1 00:28:08 2020 kern.info kernel: [ 421.518082] device wlan0
> left promiscuous mode
> Sat Aug 1 00:28:08 2020 kern.info kernel: [ 421.522872] br-lan: port
> 2(wlan0) entered disabled state
> Sat Aug 1 00:28:08 2020 daemon.notice hostapd: wlan0:
> CTRL-EVENT-TERMINATING
> Sat Aug 1 00:28:08 2020 daemon.err hostapd: hostapd_free_hapd_data:
> Interface wlan0 wasn't started
> Sat Aug 1 00:28:08 2020 daemon.notice hostapd: wlan0:
> CTRL-EVENT-TERMINATING
> Sat Aug 1 00:28:08 2020 daemon.err hostapd: hostapd_free_hapd_data:
> Interface wlan0 wasn't started
> Sat Aug 1 00:28:08 2020 daemon.notice netifd: radio0 (12085): Command
> failed: Invalid argument
> Sat Aug 1 00:28:08 2020 daemon.notice hostapd: Configuration file:
> /var/run/hostapd-phy1.conf (phy wlan1) --> new PHY
> Sat Aug 1 00:28:10 2020 kern.info kernel: [ 421.632090] ieee80211 phy1:
> rt2800_rf_self_txdc_cal: Info - RF Tx self calibration start
> Sat Aug 1 00:28:10 2020 kern.info kernel: [ 421.640920] ieee80211 phy1:
> rt2800_rf_self_txdc_cal: Info - RF Tx self calibration end
> Sat Aug 1 00:28:10 2020 daemon.notice netifd: radio0 (12085): WARNING
> (wireless_add_process): executable path /usr/sbin/wpad does not match
> process path (/proc/exe)
> Sat Aug 1 00:28:10 2020 daemon.notice netifd: radio0 (12085): Command
> failed: Invalid argument
> Sat Aug 1 00:28:10 2020 kern.info kernel: [ 423.614783] ieee80211 phy1:
> rt2800_loft_iq_calibration: Info - LOFT Calibration Done!
> Sat Aug 1 00:28:10 2020 kern.info kernel: [ 423.627667] ieee80211 phy1:
> rt2800_iq_search: Info - IQCalibration Start!
> Sat Aug 1 00:28:10 2020 kern.info kernel: [ 423.649021] ieee80211 phy1:
> rt2800_iq_search: Info - IQCalibration Done! CH = 0, (gain= 1, phase=3f)
> Sat Aug 1 00:28:10 2020 kern.info kernel: [ 423.659264] ieee80211 phy1:
> rt2800_iq_search: Info - IQCalibration Start!
> Sat Aug 1 00:28:10 2020 kern.info kernel: [ 423.680586] ieee80211 phy1:
> rt2800_iq_search: Info - IQCalibration Done! CH = 1, (gain= f, phase=3e)
> Sat Aug 1 00:28:10 2020 kern.info kernel: [ 423.689946] ieee80211 phy1:
> rt2800_loft_iq_calibration: Info - TX IQ Calibration Done!
> Sat Aug 1 00:28:11 2020 kern.info kernel: [ 423.714003] ieee80211 phy1:
> rt2800_rxiq_calibration: Info - RXIQ G_imb=1, Ph_rx=5
> Sat Aug 1 00:28:11 2020 kern.info kernel: [ 423.731908] ieee80211 phy1:
> rt2800_rxiq_calibration: Info - RXIQ G_imb=3, Ph_rx=-7
> Sat Aug 1 00:28:11 2020 kern.info kernel: [ 423.749495] IPv6:
> ADDRCONF(NETDEV_UP): wlan1: link is not ready
> Sat Aug 1 00:28:11 2020 kern.warn kernel: [ 423.755627] warning:
> (zone_netdev_event:346)dev=wlan1 set zone=127 type=0
> Sat Aug 1 00:28:11 2020 kern.warn kernel: [ 423.762585]
> {natflow}:natflow_netdev_event(): catch NETDEV_UP event for dev=wlan1, add
> ingress hook
> Sat Aug 1 00:28:11 2020 kern.info kernel: [ 423.781021] br-lan: port
> 2(wlan1) entered blocking state
> Sat Aug 1 00:28:11 2020 kern.info kernel: [ 423.786460] br-lan: port
> 2(wlan1) entered disabled state
> Sat Aug 1 00:28:11 2020 kern.info kernel: [ 423.792358] device wlan1
> entered promiscuous mode
> Sat Aug 1 00:28:11 2020 daemon.notice hostapd: ctrl_iface exists and
> seems to be in use - cannot override it
> Sat Aug 1 00:28:11 2020 daemon.notice hostapd: Delete
> '/var/run/hostapd/wlan1' manually if it is not used anymore
> Sat Aug 1 00:28:11 2020 daemon.err hostapd: Failed to setup control
> interface for wlan1
> Sat Aug 1 00:28:11 2020 daemon.err hostapd: wlan1: Unable to setup
> interface.
> Sat Aug 1 00:28:11 2020 daemon.notice hostapd: nl80211: deinit
> ifname=wlan1 disabled_11b_rates=0
> Sat Aug 1 00:28:11 2020 kern.info kernel: [ 423.801095] device wlan1
> left promiscuous mode
> Sat Aug 1 00:28:11 2020 kern.info kernel: [ 423.805878] br-lan: port
> 2(wlan1) entered disabled state
> Sat Aug 1 00:28:11 2020 daemon.notice hostapd: wlan1:
> CTRL-EVENT-TERMINATING
> Sat Aug 1 00:28:11 2020 daemon.err hostapd: hostapd_free_hapd_data:
> Interface wlan1 wasn't started
> Sat Aug 1 00:28:11 2020 daemon.notice hostapd: wlan1:
> CTRL-EVENT-TERMINATING
> Sat Aug 1 00:28:11 2020 daemon.err hostapd: hostapd_free_hapd_data:
> Interface wlan1 wasn't started
> Sat Aug 1 00:28:11 2020 daemon.notice netifd: radio1 (12084): Command
> failed: Invalid argument
> Sat Aug 1 00:28:11 2020 daemon.notice netifd: radio1 (12084): WARNING
> (wireless_add_process): executable path /usr/sbin/wpad does not match
> process path (/proc/exe)
> Sat Aug 1 00:28:11 2020 daemon.notice netifd: radio1 (12084): Command
> failed: Invalid argument
> Sat Aug 1 00:28:11 2020 kern.info kernel: [ 423.965955] IPv6:
> ADDRCONF(NETDEV_UP): wlan0: link is not ready
> Sat Aug 1 00:28:11 2020 kern.warn kernel: [ 423.972088] warning:
> (zone_netdev_event:346)dev=wlan0 set zone=127 type=0
> Sat Aug 1 00:28:11 2020 kern.warn kernel: [ 423.979359]
> {natflow}:natflow_netdev_event(): catch NETDEV_UP event for dev=wlan0, add
> ingress hook
> Sat Aug 1 00:28:11 2020 kern.info kernel: [ 424.143854] br-lan: port
> 2(wlan0) entered blocking state
> Sat Aug 1 00:28:11 2020 kern.info kernel: [ 424.149363] br-lan: port
> 2(wlan0) entered disabled state
> Sat Aug 1 00:28:11 2020 kern.info kernel: [ 424.155265] device wlan0
> entered promiscuous mode
> Sat Aug 1 00:28:13 2020 kern.info kernel: [ 424.455727] ieee80211 phy1:
> rt2800_rf_self_txdc_cal: Info - RF Tx self calibration start
> Sat Aug 1 00:28:13 2020 kern.info kernel: [ 424.464588] ieee80211 phy1:
> rt2800_rf_self_txdc_cal: Info - RF Tx self calibration end
> Sat Aug 1 00:28:14 2020 kern.info kernel: [ 426.353880] ieee80211 phy1:
> rt2800_loft_iq_calibration: Info - LOFT Calibration Done!
> Sat Aug 1 00:28:14 2020 kern.info kernel: [ 426.366676] ieee80211 phy1:
> rt2800_iq_search: Info - IQCalibration Start!
> Sat Aug 1 00:28:14 2020 kern.info kernel: [ 426.388038] ieee80211 phy1:
> rt2800_iq_search: Info - IQCalibration Done! CH = 0, (gain= 0, phase=3e)
> Sat Aug 1 00:28:14 2020 kern.info kernel: [ 426.398294] ieee80211 phy1:
> rt2800_iq_search: Info - IQCalibration Start!
> Sat Aug 1 00:28:14 2020 kern.info kernel: [ 426.419641] ieee80211 phy1:
> rt2800_iq_search: Info - IQCalibration Done! CH = 1, (gain= 0, phase=3e)
> Sat Aug 1 00:28:14 2020 kern.info kernel: [ 426.429035] ieee80211 phy1:
> rt2800_loft_iq_calibration: Info - TX IQ Calibration Done!
> Sat Aug 1 00:28:14 2020 kern.info kernel: [ 426.453232] ieee80211 phy1:
> rt2800_rxiq_calibration: Info - RXIQ G_imb=0, Ph_rx=5
> Sat Aug 1 00:28:14 2020 kern.info kernel: [ 426.471156] ieee80211 phy1:
> rt2800_rxiq_calibration: Info - RXIQ G_imb=3, Ph_rx=-7
> Sat Aug 1 00:28:14 2020 kern.info kernel: [ 426.487074] IPv6:
> ADDRCONF(NETDEV_UP): wlan1: link is not ready
> Sat Aug 1 00:28:14 2020 kern.warn kernel: [ 426.493204] warning:
> (zone_netdev_event:346)dev=wlan1 set zone=127 type=0
> Sat Aug 1 00:28:14 2020 kern.warn kernel: [ 426.500212]
> {natflow}:natflow_netdev_event(): catch NETDEV_UP event for dev=wlan1, add
> ingress hook
> Sat Aug 1 00:28:14 2020 kern.info kernel: [ 426.663688] br-lan: port
> 3(wlan1) entered blocking state
> Sat Aug 1 00:28:14 2020 kern.info kernel: [ 426.669180] br-lan: port
> 3(wlan1) entered disabled state
> Sat Aug 1 00:28:14 2020 kern.info kernel: [ 426.675135] device wlan1
> entered promiscuous mode
>
> I hope I will be able to set it up, since I really like the idea behind
> your tool!
>
> Best regards
> M
>
>
> On Friday, July 31, 2020 at 5:08:25 PM UTC+2, Federico Capoano wrote:
>>
>> Hi Mirza,
>>
>> could you please share the configuration in /etc/config/wireless and the
>> relevant error output of logread after you run the command "wifi" or
>> "reload_config" (the latter works only after changing the wireless
>> configuration).
>>
>> F.
>>
>> On Fri, Jul 31, 2020 at 4:25 AM Mirza Arnaut <[email protected]> wrote:
>>
>>> I wanted to try using OpenWRT for my Xiaomi Routers, but found out, that
>>> the Mi WiFi R3 is not officially supported. But I found out, that the
>>> Chinese fork, called X-WRT has images for it, hence I used it, thinking
>>> that not much would be changed in the image.
>>> Now I have a Redmi AC2100 which works perfectly with OpenWisp, so does
>>> the R3 for basic configurations (Timezone, Hostnam, etc.).
>>> Since I am a lazy person, I wanted to make a 2.4 and 5 GHz network and
>>> apply it on both of them, but it fails to do so on the X-WRT router.
>>> Has someone successfully got it working? I suppose the config
>>> differences are causing this behaviour, since the default name for wifi
>>> interfaces are not wifi_wlanX but wifinetX for example.
>>> Thanks in advance!
>>>
>>> --
>>> You received this message because you are subscribed to the Google
>>> Groups "OpenWISP" group.
>>> To unsubscribe from this group and stop receiving emails from it, send
>>> an email to [email protected].
>>> To view this discussion on the web, visit
>>> https://groups.google.com/d/msgid/openwisp/c63b10e4-6980-4c46-907c-c2be01384d46n%40googlegroups.com
>>>
>>> <https://groups.google.com/d/msgid/openwisp/c63b10e4-6980-4c46-907c-c2be01384d46n%40googlegroups.com?utm_medium=email&utm_source=footer>
>>> .
>>>
>>
--
You received this message because you are subscribed to the Google Groups
"OpenWISP" group.
To unsubscribe from this group and stop receiving emails from it, send an email
to [email protected].
To view this discussion on the web, visit
https://groups.google.com/d/msgid/openwisp/565bda41-788a-46c5-a8e8-56870879c989o%40googlegroups.com.
