I state that I have recently approached Openwrt. I noticed that just installed, by default Openwrt has a virtual interface called LAN that relies on a bridge called br-lan between the eth0 physical ethernet interface and the wlan0 wireless interface.
This wireless interface called wlan0 has in the Network field the virtual interface called LAN mentioned above and is associated with the object radio0. I would like to leave the default configuration, but only change the wlan0 wireless interface settings. To do this from Openwisp, I created an Interface type template with the following fields: Interface1: Wireless Interface name: wlan0 type: wireless autostart: yes network: LAN wireless: access point mode: access point radio: radio0 When I go to the AP, I find that another virtual interface called LAN has been created, basically a duplicate. In addition, the wlan0 wireless interface appears to be in WDS. Why? Thank you -- You received this message because you are subscribed to the Google Groups "OpenWISP" group. To unsubscribe from this group and stop receiving emails from it, send an email to [email protected]. To view this discussion on the web, visit https://groups.google.com/d/msgid/openwisp/078701d74a25%24b9e24c60%242da6e520%24%40gmail.com.
