I have no way to verify what you're saying. I suggest you to proceed as follows: forget for a moment OpenWISP and focus on finding out the right OpenWRT configuration that works for the use case you need. Once you have that, generate the same configuration via OpenWISP (check the generated configuration using preview).
What you say about WDS does not make sense because WDS is set to disabled explicitly, so there's likely an issue somewhere else. Best regards *Federico Capoano* On Thu, May 20, 2021 at 10:37 AM <[email protected]> wrote: > Hi, I followed the given configuration but I had the following problems: > > in Network \ Interface there is a virtual interface called WLAN0 for which > there is the error: "Error: Network device is not present". > > In Network \ Wireless the wlan0 interface which in Mode is set as Access > Point (WDS) must be set as Access Point. How can I solve? > > Thank you > > > > > > *Da:* [email protected] <[email protected]> *Per conto di > *Federico Capoano > *Inviato:* martedì 18 maggio 2021 19:11 > *A:* [email protected] > *Oggetto:* Re: [openwisp] Wireless interface template > > > > Please see the concept of "attached network": > > > http://netjsonconfig.openwisp.org/en/latest/backends/openwrt.html#wireless-attached-to-a-different-network > > > > This is the conf you should be using: > > > > { > "interfaces": [ > { > "wireless": { > "network": ["lan"], > "mode": "access_point", > "radio": "radio0", > "ack_distance": 0, > "rts_threshold": 0, > "frag_threshold": 0, > "ssid": "Righi_Wifi", > "hidden": false, > "wds": false, > "encryption": { > "protocol": "wpa2_personal", > "key": "WifiRgh-935@?x0", > "disabled": false, > "cipher": "auto" > }, > "wmm": true, > "isolate": false, > "macfilter": "disable", > "maclist": [] > }, > "type": "wireless", > "name": "wlan0", > "mtu": 1500, > "mac": "", > "autostart": true, > "disabled": false, > "addresses": [], > "network": "" > } > ] > } > > > > Best regards > > Federico Capoano > > > > On Tue, May 18, 2021 at 11:59 AM <[email protected]> wrote: > > { > > "interfaces": [ > > { > > "wireless": { > > "network": [], > > "mode": "access_point", > > "radio": "radio0", > > "ack_distance": 0, > > "rts_threshold": 0, > > "frag_threshold": 0, > > "ssid": "Righi_Wifi", > > "hidden": false, > > "wds": false, > > "encryption": { > > "protocol": "wpa2_personal", > > "key": "WifiRgh-935@?x0", > > "disabled": false, > > "cipher": "auto" > > }, > > "wmm": true, > > "isolate": false, > > "macfilter": "disable", > > "maclist": [] > > }, > > "type": "wireless", > > "name": "wlan0", > > "mtu": 1500, > > "mac": "", > > "autostart": true, > > "disabled": false, > > "addresses": [], > > "network": "LAN" > > } > > ] > > } > > > > Bye > > > > *Da:* [email protected] <[email protected]> *Per conto di > *Federico Capoano > *Inviato:* lunedì 17 maggio 2021 17:46 > *A:* [email protected] > *Oggetto:* Re: [openwisp] Wireless interface template > > > > Hi, > > > > Can you share the NetJSON configuration of this interface please? > > > > Federico > > > > On Sun, May 16, 2021 at 2:33 AM <[email protected]> wrote: > > I state that I have recently approached Openwrt. I noticed that just > installed, by default Openwrt has a virtual interface called LAN that > relies on a bridge called br-lan between the eth0 physical ethernet > interface and the wlan0 wireless interface. > > This wireless interface called wlan0 has in the Network field the virtual > interface called LAN mentioned above and is associated with the object > radio0. > > I would like to leave the default configuration, but only change the wlan0 > wireless interface settings. > > To do this from Openwisp, I created an Interface type template with the > following fields: > > > > Interface1: Wireless Interface > > name: wlan0 > > type: wireless > > autostart: yes > > network: LAN > > wireless: access point > > mode: access point > > radio: radio0 > > > > When I go to the AP, I find that another virtual interface called LAN has > been created, basically a duplicate. In addition, the wlan0 wireless > interface appears to be in WDS. > > > > Why? Thank you > > -- > You received this message because you are subscribed to the Google Groups > "OpenWISP" group. > To unsubscribe from this group and stop receiving emails from it, send an > email to [email protected]. > To view this discussion on the web, visit > https://groups.google.com/d/msgid/openwisp/078701d74a25%24b9e24c60%242da6e520%24%40gmail.com > <https://groups.google.com/d/msgid/openwisp/078701d74a25%24b9e24c60%242da6e520%24%40gmail.com?utm_medium=email&utm_source=footer> > . > > -- > You received this message because you are subscribed to the Google Groups > "OpenWISP" group. > To unsubscribe from this group and stop receiving emails from it, send an > email to [email protected]. > To view this discussion on the web, visit > https://groups.google.com/d/msgid/openwisp/CAAGgX6L2-D12A-wTxhijmdyvHCzHFX-R4fQnsOYw3YFi8fpufA%40mail.gmail.com > <https://groups.google.com/d/msgid/openwisp/CAAGgX6L2-D12A-wTxhijmdyvHCzHFX-R4fQnsOYw3YFi8fpufA%40mail.gmail.com?utm_medium=email&utm_source=footer> > . > > -- > You received this message because you are subscribed to the Google Groups > "OpenWISP" group. > To unsubscribe from this group and stop receiving emails from it, send an > email to [email protected]. > To view this discussion on the web, visit > https://groups.google.com/d/msgid/openwisp/0e9801d74c07%243396ec90%249ac4c5b0%24%40gmail.com > <https://groups.google.com/d/msgid/openwisp/0e9801d74c07%243396ec90%249ac4c5b0%24%40gmail.com?utm_medium=email&utm_source=footer> > . > > -- > You received this message because you are subscribed to the Google Groups > "OpenWISP" group. > To unsubscribe from this group and stop receiving emails from it, send an > email to [email protected]. > To view this discussion on the web, visit > https://groups.google.com/d/msgid/openwisp/CAAGgX6JAMYC0wCtCrHH887aG5mjuB2oeUeRAUsiFD-Vs-svkxw%40mail.gmail.com > <https://groups.google.com/d/msgid/openwisp/CAAGgX6JAMYC0wCtCrHH887aG5mjuB2oeUeRAUsiFD-Vs-svkxw%40mail.gmail.com?utm_medium=email&utm_source=footer> > . > > -- > You received this message because you are subscribed to the Google Groups > "OpenWISP" group. > To unsubscribe from this group and stop receiving emails from it, send an > email to [email protected]. > To view this discussion on the web, visit > https://groups.google.com/d/msgid/openwisp/133401d74d8e%241adf5e20%24509e1a60%24%40gmail.com > <https://groups.google.com/d/msgid/openwisp/133401d74d8e%241adf5e20%24509e1a60%24%40gmail.com?utm_medium=email&utm_source=footer> > . > -- You received this message because you are subscribed to the Google Groups "OpenWISP" group. To unsubscribe from this group and stop receiving emails from it, send an email to [email protected]. To view this discussion on the web, visit https://groups.google.com/d/msgid/openwisp/CAAGgX6LA-qibC2QqWQhNZgruF%3D0tDzK2zBLmgQTe7sW5GvM_xA%40mail.gmail.com.
