Author: rmilecki Date: 2015-08-12 17:26:18 +0200 (Wed, 12 Aug 2015) New Revision: 46586
Modified: branches/chaos_calmer/target/linux/bcm53xx/base-files/etc/board.d/02_network branches/chaos_calmer/target/linux/bcm53xx/patches-3.18/710-b53-add-hacky-CPU-port-fixes-for-devices-not-using-p.patch Log: bcm53xx: add workaround for Netgear R8000 network According to the info from NVRAM we should use port 8 for the CPU (and interface eth2). Unfortunately it doesn't work right now, so lets switch to the port 5. Signed-off-by: Rafa?\197?\130 Mi?\197?\130ecki <[email protected]> Modified: branches/chaos_calmer/target/linux/bcm53xx/base-files/etc/board.d/02_network =================================================================== --- branches/chaos_calmer/target/linux/bcm53xx/base-files/etc/board.d/02_network 2015-08-12 13:30:34 UTC (rev 46585) +++ branches/chaos_calmer/target/linux/bcm53xx/base-files/etc/board.d/02_network 2015-08-12 15:26:18 UTC (rev 46586) @@ -20,10 +20,27 @@ ;; esac +# Workaround for devices using eth2 +case "$board" in +netgear,r8000) + ifname=eth0 + ;; +esac + ucidef_set_interface_loopback ucidef_set_interfaces_lan_wan "$ifname.1" "$ifname.2" ucidef_add_switch "switch0" "1" "1" +# Workaround for devices using CPU port 8 (connected to eth2) +case "$board" in +netgear,r8000) + ucidef_add_switch_vlan "switch0" "1" "0 1 2 3 5t" + ucidef_add_switch_vlan "switch0" "2" "4 5t" + board_config_flush + exit 0 + ;; +esac + # NVRAM entries may contain unsorted ports, e.g. Netgear R6250 uses # vlan1ports=3 2 1 0 5* # vlan2ports=4 5u Modified: branches/chaos_calmer/target/linux/bcm53xx/patches-3.18/710-b53-add-hacky-CPU-port-fixes-for-devices-not-using-p.patch =================================================================== --- branches/chaos_calmer/target/linux/bcm53xx/patches-3.18/710-b53-add-hacky-CPU-port-fixes-for-devices-not-using-p.patch 2015-08-12 13:30:34 UTC (rev 46585) +++ branches/chaos_calmer/target/linux/bcm53xx/patches-3.18/710-b53-add-hacky-CPU-port-fixes-for-devices-not-using-p.patch 2015-08-12 15:26:18 UTC (rev 46586) @@ -21,7 +21,7 @@ #include "b53_regs.h" #include "b53_priv.h" -@@ -1313,6 +1314,11 @@ static int b53_switch_init(struct b53_de +@@ -1313,6 +1314,18 @@ static int b53_switch_init(struct b53_de sw_dev->cpu_port = 5; } @@ -30,6 +30,13 @@ + else if (of_machine_is_compatible("netgear,r8000")) + sw_dev->cpu_port = 8; + ++ /* ++ * Workaround for devices using port 8 (connected to the 3rd iface). ++ * For some reason it doesn't work (no packets on eth2). ++ */ ++ if (of_machine_is_compatible("netgear,r8000")) ++ sw_dev->cpu_port = 5; ++ /* cpu port is always last */ sw_dev->ports = sw_dev->cpu_port + 1; dev->enabled_ports |= BIT(sw_dev->cpu_port); _______________________________________________ openwrt-commits mailing list [email protected] https://lists.openwrt.org/cgi-bin/mailman/listinfo/openwrt-commits
