Author: nbd
Date: 2015-08-13 21:02:16 +0200 (Thu, 13 Aug 2015)
New Revision: 46587

Modified:
   
trunk/target/linux/ipq806x/patches-3.18/157-ARM-DT-ipq8064-Add-ADM-device-node.patch
   
trunk/target/linux/ipq806x/patches-3.18/165-arm-qcom-dts-Enable-NAND-node-on-IPQ8064-AP148-platform.patch
   
trunk/target/linux/ipq806x/patches-3.18/707-ARM-dts-qcom-add-mdio-nodes-to-ap148-db149.patch
   
trunk/target/linux/ipq806x/patches-3.18/708-ARM-dts-qcom-add-gmac-nodes-to-ipq806x-platforms.patch
Log:
ipq806x: disable DMA on the SPI flash

Previous patch 6f2905eeb6ce5ddec8d12d677e1f377a940b537b enabled ADM in
the kernel, which causes a kernel panic when accessing the SPI flash.

As a workaround, We'll disable DMA for the flash for now. It was not
enabled previously anyway so we'll just leave it as is.

Reported-by: Jonas Gorski <[email protected]>
Signed-off-by: Mathieu Olivari <[email protected]>

Modified: 
trunk/target/linux/ipq806x/patches-3.18/157-ARM-DT-ipq8064-Add-ADM-device-node.patch
===================================================================
--- 
trunk/target/linux/ipq806x/patches-3.18/157-ARM-DT-ipq8064-Add-ADM-device-node.patch
        2015-08-12 15:26:18 UTC (rev 46586)
+++ 
trunk/target/linux/ipq806x/patches-3.18/157-ARM-DT-ipq8064-Add-ADM-device-node.patch
        2015-08-13 19:02:16 UTC (rev 46587)
@@ -11,19 +11,6 @@
  arch/arm/boot/dts/qcom-ipq8064.dtsi      | 21 +++++++++++++++++++++
  2 files changed, 25 insertions(+)
 
---- a/arch/arm/boot/dts/qcom-ipq8064-ap148.dts
-+++ b/arch/arm/boot/dts/qcom-ipq8064-ap148.dts
-@@ -90,6 +90,10 @@
- 
-                               cs-gpios = <&qcom_pinmux 20 0>;
- 
-+                              dmas = <&adm_dma 6>,
-+                                      <&adm_dma 5>;
-+                              dma-names = "rx", "tx";
-+
-                               flash: m25p80@0 {
-                                       compatible = "s25fl256s1";
-                                       #address-cells = <1>;
 --- a/arch/arm/boot/dts/qcom-ipq8064.dtsi
 +++ b/arch/arm/boot/dts/qcom-ipq8064.dtsi
 @@ -657,5 +657,25 @@

Modified: 
trunk/target/linux/ipq806x/patches-3.18/165-arm-qcom-dts-Enable-NAND-node-on-IPQ8064-AP148-platform.patch
===================================================================
--- 
trunk/target/linux/ipq806x/patches-3.18/165-arm-qcom-dts-Enable-NAND-node-on-IPQ8064-AP148-platform.patch
   2015-08-12 15:26:18 UTC (rev 46586)
+++ 
trunk/target/linux/ipq806x/patches-3.18/165-arm-qcom-dts-Enable-NAND-node-on-IPQ8064-AP148-platform.patch
   2015-08-13 19:02:16 UTC (rev 46587)
@@ -57,7 +57,7 @@
                };
  
                gsbi@16300000 {
-@@ -174,5 +199,19 @@
+@@ -170,5 +195,19 @@
                        pinctrl-0 = <&pcie1_pins>;
                        pinctrl-names = "default";
                };

Modified: 
trunk/target/linux/ipq806x/patches-3.18/707-ARM-dts-qcom-add-mdio-nodes-to-ap148-db149.patch
===================================================================
--- 
trunk/target/linux/ipq806x/patches-3.18/707-ARM-dts-qcom-add-mdio-nodes-to-ap148-db149.patch
        2015-08-12 15:26:18 UTC (rev 46586)
+++ 
trunk/target/linux/ipq806x/patches-3.18/707-ARM-dts-qcom-add-mdio-nodes-to-ap148-db149.patch
        2015-08-13 19:02:16 UTC (rev 46587)
@@ -38,7 +38,7 @@
                };
  
                gsbi@16300000 {
-@@ -209,6 +219,34 @@
+@@ -205,6 +215,34 @@
                        nand-ecc-strength = <4>;
                        nand-bus-width = <8>;
                };

Modified: 
trunk/target/linux/ipq806x/patches-3.18/708-ARM-dts-qcom-add-gmac-nodes-to-ipq806x-platforms.patch
===================================================================
--- 
trunk/target/linux/ipq806x/patches-3.18/708-ARM-dts-qcom-add-gmac-nodes-to-ipq806x-platforms.patch
  2015-08-12 15:26:18 UTC (rev 46586)
+++ 
trunk/target/linux/ipq806x/patches-3.18/708-ARM-dts-qcom-add-gmac-nodes-to-ipq806x-platforms.patch
  2015-08-13 19:02:16 UTC (rev 46587)
@@ -29,7 +29,7 @@
                };
  
                gsbi@16300000 {
-@@ -247,6 +257,27 @@
+@@ -243,6 +253,27 @@
                                reg = <4>;
                        };
                };
_______________________________________________
openwrt-commits mailing list
[email protected]
https://lists.openwrt.org/cgi-bin/mailman/listinfo/openwrt-commits

Reply via email to