Thanks :D On Thu, Sep 10, 2009 at 12:17 AM, Nico<n...@openwrt.org> wrote: > Hi Luigi, > > There were no particular reasons preventing external toolchain support > from hitting trunk apart from a constant lack of time on my side... > > I'll try my best to have it commited by the end of the week. > > Thanks for your help and support ! > > Regards, > -- > Nico > > > Luigi 'Comio' Mantellini wrote: >> Hi List, >> Hi Nico, >> >> find the attached my contribute. >> Starting from nico's patch I build this patchset that adds the ability to use >> use an external toolchain (rebased on r17459). >> >> I compiled a simple ppc440 target with and without the external toolchain >> usage and it seems to work fine. As external toolchain I used the >> CodeSourcery >> G++lite 4.3-50 for Power EABI >> (http://www.codesourcery.com/sgpp/lite/power/portal/release603). >> >> Find also the config.external and config.normal configs to look my board >> setup. >> >> My wish is to see this patch in the main-line as soon possible because is >> very >> important for my job. >> >> Any feedback is welcome. >> >> best regards, >> >> luigi >> >> >> >> Il domenica 6 settembre 2009 20:26:46 Luigi Mantellini ha scritto: >> >>> Hi List, >>> >>> as in the past I will ask again opinions regarding the optional >>> support for external cross-toolchain. >>> >>> Reading the dev.openwrt.org I see: >>> >>> "OpenWrt is currently being used in industrial control systems, small >>> robots, sensor networks, home control solutions, VoIP systems, both >>> wired and wireless networks and a whole lot more." >>> >>> I'm working on network devices and usually I receive from my vendors >>> the BSP and toolchain that is considered "official" and "safe" for the >>> BSP. My suppliers usually don't accent to support BSP (and anwser to >>> my questions) if I don't use the provided toolchain. >>> >>> From these considerations, My opinion is that external target-specific >>> toolchian should be supported by OpenWRT avoiding to compile everytime >>> the toolchain. >>> >>> In past Nico sent a set of patch for support this feature but I think >>> that are not included yet in the mainline. >>> >>> Nico, can you provide me your last patches? and explain if them will >>> be included or not? >>> >>> thanks in advance and best regards, >>> >>> luigi >>> >>> >> >> > > _______________________________________________ > openwrt-devel mailing list > openwrt-devel@lists.openwrt.org > https://lists.openwrt.org/mailman/listinfo/openwrt-devel >
-- Luigi 'Comio' Mantellini R&D - Software Industrie Dial Face S.p.A. Via Canzo, 4 20068 Peschiera Borromeo (MI), Italy Tel.: +39 02 5167 2813 Fax: +39 02 5167 2459 web: www.idf-hit.com mail: luigi.mantell...@idf-hit.com _______________________________________________ openwrt-devel mailing list openwrt-devel@lists.openwrt.org https://lists.openwrt.org/mailman/listinfo/openwrt-devel
